通过碳纤维(CF)表面官能团的酰氯化,采用阴离子接枝反应制备了表面接枝尼龙6(PA6)的碳纤维. SEM观察表明,接枝PA6的CF表面呈粗颗粒状形态. XPS结果表明,CF表面N/C 比例由接枝前的0.030提高到接枝PA6后的0.061. 接枝率达2.1%以上. 接枝PA6的CF增强了CF与PA6复合材料界面的相互作用,剪切强度提高了14%.
参考文献
| [1] | ZENG Han-Min(曾汉民). In(见): LI Heng-De(李恒徳),XIAO Ji-Mei(肖基美) Chief-Edrs(主编). The Surface and Interface of Material(材料表面与界面),Chapt 9[M]. Beijing(北京):Qinghua University Press(清华大学出版社),1990 |
| [2] | HE Fu(贺福),WANG Mao-Zhang(王茂章). Carbon Fiber and Its Composites(碳纤维及其复合材料)[M]. Beijing(北京):Science Press(科学出版社),1997 |
| [3] | ZENG Han-Min(曾汉民),FENG Li(冯力). Chem J Chin Univ(高等学校化学学报)[J],1983,5:610 |
| [4] | ZENG Han-Min(曾汉民),CHEN Hai-Ning(陈海宁),CHEN Hai-Yang(陈海阳). Acta Materiae Compositae Sinica(复合材料学报)[J],1985,2(4):49 |
| [5] | Lowde D R,Williams J O,Attwood P A, et al. J Chem Sci Farady,Transaction,I[J],1979,75(10):2 312 |
| [6] | LI Tie-Qi(李铁骑). Doctoral Dissertation([博士学位论文]). Guangzhou(广州):Zhongshan University(中山大学),1997 |
| [7] | Beamson G,Baiggs D. In:High Resolution XPS of Organic Polymers-The Scienta ESCA300 Database[M]. New York:John Wiley & Sons Press,1995 |
| [8] | Yu Z,Ait-Kiadi A,Brisson J. Polym Eng Sci[J],1991,31(16):1 222 |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%