在纯Ti(TA2)基体上分别激光熔覆Zr65Al7.5Ni1oCu17.5和Zr65Al7.5Ni1oCu17.5+O.8%C合金粉末,对涂层进行了X射线衍射分析、SEM观察和TEM分析,可知涂层由金属间化合物(其中包括纳米晶)和少量的非晶组成.这种具有高比强度、高硬度和高抗氧化性的金属间化合物与非晶相混合的复合涂层具有较好的性能,两种涂层的最高硬度分别达到1114.4HK和977.8HK.
参考文献
| [1] | Song Wuling;Echigoya J;Zhu Beidi et al.Vacuum laser cladding and effect of Hf on the cracking susceptibility and the microstructure of Fe-Cr-Ni laser-clad layer[J].Surface and Coatings Technology,2000,123(01):76-79. |
| [2] | HidouciA;Pelletier J M;Dezert D et al.Microstructural and mechanical characteristics of laser coatings[J].Surface and Coatings Technology,2000,123(01):17-22. |
| [3] | Yoshioka H;Asami K;Kawashima A et al.Laser-processed corrosion-resistant amorphous Ni-Cr-P-B surface alloys on a mild steel[J].Corrosion Science,1987,27(09):981-995. |
| [4] | 王茂才.激光熔敷PdCuSi合金非晶涂层的研究[J].中国激光,1995(03):228. |
| [5] | Zhong Minlin;Liu Wenjin;Ren Jialie et al.Research on constitution of the CW laser glazed Fe-C-Si-B eutectic alloy layer[J].中国激光,1997,24(09):847-852. |
| [6] | 钟敏霖;刘文今;任家烈 等.合金表面连续激光非晶化的研究及进展[J].机械工程材料,1996,20(05):19-23. |
| [7] | Akihisa Inoue;Yoshihiko Yokoyama;Yoshiyuki Shinohara .Preparation of bulky Zr-based amorphous alloys by a zone melting method[J].Materials Transactions,1994,35(12):923-926. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%