研究了拉伸法制备β型聚偏二氟乙烯薄膜的工艺以及在不同工艺条件下聚偏二氟乙烯薄膜的组织结构情况.结果表明:溶液淬水初始膜有较高的结晶度、良好的拉伸和电击穿性能.拉伸促使初始膜中的球晶α相向片晶β相转变,降低拉伸温度,增大拉伸比,有利于相变.α→β转变完全后进一步拉伸可促使部分非晶相向β相转变.拉伸及退火均使薄膜电击穿强度有明显提高.
参考文献
[1] | WangTT;Herbert J M;Gan A.The applications of ferroelectric polymers[M].Blackie:Gassow and London,1988:1-20. |
[2] | Legrand J.F. .Morphology and structure of polymer electrets and ferroelectric polymers[J].IEEE transactions on electrical insulation. (Institute of Electrical and Electronics Engineers. Electrical Insulation Group). New York.,1993(3):336-343. |
[3] | LegrandJF;Lajzerowicz J .Saxs investigation of the lamellar morphology in rolled and poled PVDFthick films[J].Ferroelectrics,1983,51:129-135. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%