介绍了一种新型的双层组合压边圈.在无需对常规薄板拉深液压机进行改造的情况下,只需要改变压边圈的结构,即能实现连续、灵活方便地控制实际压边力的分布状态和大小,从而提高大型复杂零件的薄板拉深成形质量.
参考文献
| [1] | 罗亚军,郑静风,张永清,何丹农.板料拉深成形过程中的变压边力技术[J].锻压技术,2003(02):21-24. |
| [2] | 王东哲,何丹农,娄臻亮,张永清,程惊雷,蒋镜昱.压边力优化控制研究[J].模具技术,2000(02):47-51. |
| [3] | 姜海峰;赵军;李硕本 等.变压边力拉深的原理及实验系统[J].塑性工程学报,1999,6(01):30-33. |
| [4] | 王东哲 .板料拉深成形变压边力理论和实验研究[D].上海交通大学,2001. |
| [5] | Lars Gunnarsson;Erik Schedin .Improving the properties of exterior body panels in automobiles using variable blank holder force[J].Journal of Materials Processing Technology,2001(2):168-173. |
| [6] | 何大钧,王勇勤,李华基,王孝培,米昱.薄板拉深压边力调节装置及控制[J].锻压机械,2002(02):10-12. |
| [7] | JalkhP;Cao J;Hardt D et al.Optimal forming of aluminum 2008-T4 conical cups using force trajectory control[R].SAE Paper, 930286 |
| [8] | YossifonS .On the acceptable blank holder force range in the deep drawing process[J].Journal of Materials Processing Technology,1992,33:171-176. |
| [9] | HardtDE .Realtime control of binderforce during stamping . Proceedings of the 16th Biennial Congress of the IDDRG[J].Journal of Engineering for Industry-Transactions of the ASME,1990,12:17-27. |
| [10] | DoegeE;EI-Dsoki T .Deep-drawing cracks-streching cracks:two different types of cracks in deep-drawing processes[J].Moterials Processing Technology,1992,32:161-168. |
| [11] | SiegertK;Dannemann E;Wagner S et al.Closed-loop control system for blank holder forces in deep drawing[J].Annals of the CIRP,1995,44:251-254. |
| [12] | 汪锐,郑晓丹,王东哲,何丹农,张立人,黄皆捷.板材拉深成形过程中摩擦条件与压边力设定关系研究[J].锻压技术,2001(06):20-23. |
| [13] | 秦泗吉.轴对称拉深成形多点压边常压边力拉深模设计[J].塑性工程学报,2002(01):78-80. |
| [14] | SiegertK .CNC-hydraulic multipoint blankholder system for sheet metal forming presses[J].Annals of the CIRP,1993,42(01):319-322. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%