对等径角挤压工艺的基本原理及其工艺参数在挤压过程中对镁合金显微组织、力学性能的影响,等径角挤压过程中镁合金的晶粒细化机理、变形机理及其微观结构、力学性能等的演变规律作了综述,并对等径角挤压镁合金超塑性研究现状和镁合金等径角挤压发展趋势作了介绍.
参考文献
[1] | Segal V M;Reznikov V I;Drotyshevkij A E et al.Plastic working of metals by simple shear[J].Russian Metallurgy,1981,1:99-105. |
[2] | Valiev R Z;Krasilnikov N A;Tsenev N K .Plastic deformation of alloys with submicron-grained structure[J].Materials Science and Engineering A,1991,137:35-40. |
[3] | M. Mabuchi;H. Iwasaki;K. Yanase;K. Higashi .LOW TEMPERATURE SUPERPLASTICITY IN AN AZ91 MAGNESIUM ALLOY PROCESSED BY ECAE[J].Scripta materialia,1997(6):681-686. |
[4] | Komura S;Berbon P B;Furukawa M et al.High strain rate superplasticity in an Al2Mg alloy containing scandium[J].Scripta Materialia,1998,38(12):1851-1856. |
[5] | Hiroyuki Watanabe;Toshiji Mukai;Koichi Ishikawa;Kenji Higashi .Low temperature superplasticity of a fine-grained ZK60 magnesium alloy processed by equal-channel-angular extrusion[J].Scripta materialia,2002(12):851-856. |
[6] | Raghavan Srinivasan .COMPUTER SIMULATION OF THE EQUICHANNEL ANGULAR EXTRUSION (ECAE) PROCESS[J].Scripta materialia,2001(1):91-96. |
[7] | Iwahashi Y;Horita Z;Furukawa M et al.Microstructural characteristics of ultrafine-grained aluminum produced using equal-channel angular pressing[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1998,29(09):2245-2252. |
[8] | Ferrasse S;Segal V M;Hartwig K T et al.Microstructural and properties of copper and aluminum alloy 3003 heavily worked by equal channel angular extrusion[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1997,28(04):1047-1051. |
[9] | W.J. Kim;S.I. Hong;Y.S. Kim .Texture development and its effect on mechanical properties of an AZ61 Mg alloy fabricated by equal channel angular pressing[J].Acta materialia,2003(11):3293-3307. |
[10] | Zan Wen Huang;Yu Yoshida;Lawrence Cisar .Microstructures and Tensile Properties of Wrought Magnesium Alloys Processed by ECAE[J].Materials Science Forum,2003(Pt.1):243-248. |
[11] | 吴伟,张禄廷,陈立佳.等通道角度挤压对两种镁合金拉伸性能的影响[J].沈阳工业大学学报,2003(01):18-22. |
[12] | Akihiro Yamsshit;Zenji Horit;Terence G .Langdon,Improving the mechanical properties of magnesium and a magnesium alloy through severe plastic deformation[J].Materials Science and Engineering A,2001,300:142-147. |
[13] | Yu Yoshida;Lawrence Cisar;Shigeharu Kamado .Effect of Microstructural Factors on Tensile Properties of an ECAE-Processed AZ31 Magnesium Alloy[J].Materials transactions,2003(4):468-475. |
[14] | Si-Young Chang;Sang-Woong Lee;Kae Myung Kang .Improvement of Mechanical Characteristics in Severely Plastic-deformed Mg Alloys[J].Materials transactions,2004(2):488-492. |
[15] | Liu T;Zhang W;Wu S D .Mechanical properties of a twophase alloy Mg-0. 8% Li-1% Al processed by equal channel angular pressing[J].Materials Science and Engineering A,2003,360:345-349. |
[16] | 吉田雄;山田英明;鎌土重晴 et al.ECAE加工したMgLi-Zn合金の引張特性ぉょび低温超塑性の發現[J].轻金属,2001,51(10):551-555. |
[17] | Yu Yoshida;Lawrence Cisar;Shigeharu Kamado .Texture Development of AZ31 Magnesium Alloy during ECAE Processing[J].Materials Science Forum,2003(Pt.1):533-538. |
[18] | S. R. Agnew;J. A. Horton;T. M. Lillo;D. W. Brown .Enhanced ductility in strongly textured magnesium produced by equal channel angular processing[J].Scripta materialia,2004(3):377-381. |
[19] | Yuichi Miyahara;Kiyoshi Matsubara;Koji Neishi .Superplastic Properties of Ultrafine-Grained Mg Alloys Processed by Extrusion Plus Equal-Channel Angular Pressing[J].Materials Science Forum,2003(Pt.1):551-556. |
[20] | K. Matsubara;Y. Miyahara;Z. Horita .Developing superplasticity in a magnesium alloy through a combination of extrusion and ECAP[J].Acta materialia,2003(11):3073-3084. |
[21] | Horita Z.;Furukawa M. .SUPERPLASTIC FORMING AT HIGH STRAIN RATES AFTER SEVERE PLASTIC DEFORMATION[J].Acta materialia,2000(14):3633-3640. |
[22] | Hiroyuki Watanabe;Toshiji Mukai;Koichi Ishikawa .Superplastic Behavior of an ECAE Processed ZK60 Magnesium Alloy[J].Materials Science Forum,2003(Pt.1):557-562. |
[23] | 小林孝幸;小池淳一;吉田雄 et al.AZ31 マグネシウム合金での活動すべリ系の粒徑依存性[J].日本金属学会会报(日本),2003,67(04):149-152. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%