指出TiAl基合金高温摩擦学性能主要由高温抗氧化性、高温强度及高温自润滑性能所决定;综述了TiAl基合金成分对其高温抗氧化性、高温强度以及高温自润滑性能的影响,最后探讨了TiAl基合金作为高温耐磨结构材料的设计方法.
参考文献
| [1] | Iino Y.;Yaesawa K. .Improvement of oxidation-resistance of TiAl alloy by electric discharge NiCrAly coating[J].International Journal of Modern Physics, B. Condensed Matter Physics, Statistical Physics, Applied Physics,2003(8/9):1158-1163. |
| [2] | Zheng RT.;Zhang YG.;Chen CQ. .Microcrack nucleation and its effect on the plastic deformation of FL gamma-TiAl alloy[J].Journal of Materials Science,2004(5):1721-1725. |
| [3] | Lee D B;Kim M H;Yang C W et al.The oxidation of TiB2particle-reinforced TiAl intermetallic composites[J].Oxidation of Metals,2001,56(3-4):215-218. |
| [4] | Lin J G;Wen C E;Zhang Y G et al.Diffusion ledge mechanism of massive γ transformation in quenched TiAl alloys[J].Journal of Materials Science Letters,1999,18:927-929. |
| [5] | 欧阳鸿武,刘咏,贺跃辉,黄伯云.粉末冶金TiAl基合金排气门的研制[J].汽车技术,2002(01):26-28. |
| [6] | Lei M K;Zhu X P;Wang X J et al.Oxidation resistance of Ion-Implanted γ-TiAl-base intermetallics[J].Oxidation of Metals,2002,58(3-4):361-365. |
| [7] | Du H L;Datta P K;Klusek Z et al.Nanoscale studies of the early stages of oxidation of a TiAl-base alloy[J].Oxidation of Metals,2004,62(3-4):175-180. |
| [8] | 李向阳;张永康 .二元Ti-Al合金高温氧化机理[J].金属学报,1997,33(09):964-968. |
| [9] | Yao-Can Zhu;Y. Zhang .The Influence of Magnetron-sputtered SiO_2 Coatings on the Cyclic Oxidation Behavior of #gamma#-TiAl Alloys[J].Materials transactions,2000(9):1118-1120. |
| [10] | 钱九红,祁学忠.TiAl（γ）基钛合金的研究与应用[J].稀有金属,2002(06):477-482. |
| [11] | 沈勇,丁晓非,王富岗,谭毅,Jenn-Ming Yang.高铌TiAl基合金高温抗氧化性能研究[J].中国腐蚀与防护学报,2004(04):203-207. |
| [12] | 彭超群;黄伯云;贺跃辉 .合金化对TiAl基合金性能的影响及机理[J].中国有色金属学报,1998,8(z1):11-17. |
| [13] | 刘自成,李书江,张卫军,林均品,陈国良,Y.W.Kim.Nb和Al对γ-TiAl基合金高温强度的影响[J].中国有色金属学报,2000(04):470. |
| [14] | 微量钪对TiAl基合金高温力学性能的影响[J].中国有色金属学报,1999(02):253. |
| [15] | 王素梅,孙康宁,卢志华,李春胜,赵天平.Ti-Al/TiC陶瓷基复合材料烧结过程的研究[J].材料科学与工程学报,2003(04):565-568. |
| [16] | Liu Zuomin;T. H. C. Childs .The study of wear characteristics of sintered high speed steels containing CaF{sub}2, MnS and TiC additives at elevated temperature[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2004(3/4):435-440. |
| [17] | 冯大鹏,刘近朱,毛绍兰,高金堂.耐高温无机固体润滑剂的发展[J].润滑与密封,1997(06):2-6. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%