对含微量硼的钢与无硼钢在不同冷速下直接淬火试样的组织进行了观察,分别测定了含硼钢与无硼钢的连续冷却转变(CCT)曲线,以及轧制后不同温度回火试样的拉伸强度.结果表明:硼的添加会使贝氏体转变Bs点降低,生成粗大的针状或板条状贝氏体组织,这种贝氏体组织越多,它的强度就越低;无硼钢在慢冷情况下(15℃/s),Bs点较高,易于形成粒状贝氏体组织,该组织与马氏体形成的混合组织使强度较高.为避免粗大贝氏体区,对于含硼钢,适宜采用快速冷却;而对于无硼钢,应尽量降低冷却速率.
参考文献
| [1] | Chiaki OUCHI .Development of Steel Plates by Intensive Use of TMCP and Direct Quenching Processes[J].ISIJ International,2001(6):542-553. |
| [2] | 潘大刚 .直接淬火工艺对中厚钢板组织性能的影响[D].东北大学,2004. |
| [3] | Lee Chang-sun;Choo Wung-yong .Effects of austenite condition and hardenability on mechanical properties of B-eontaining high strength steels[J].ISU International,2000,40(zk):S189-S193. |
| [4] | S.K. DHUA;D. MUKERJEE;D.S. SARMA .Influence of Thermomechanical Treatments on the Microstructure and Mechanical Properties of HSLA-100 Steel Plates[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2003(2):241-253. |
| [5] | Chang Woong-seong .Microstrueture and mechanical properties of 780 MPa high strength steels produced by directquenching and tempering process[J].Journal of Materials Science,2002,37:1973-1979. |
| [6] | 林慧国;傅代直.钢的奥氏体转变曲线--原理、测试与应用[M].北京:机械工业出版社,1988 |
| [7] | 方鸿生;王家军;杨志刚;薄祥生 郑燕豪.贝氏体相变[M].北京:科学出版社,1999 |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%