采用超声波检测技术无损区分材料不同组织状态的研究近年来已成为热点,以经控轧控冷工艺生产的30Mn2SiV非调质D级抽油杆用钢为对象,采用水浸线聚焦检测技术,借助超声波频谱分析方法,以相对衰减系数为无损表征参量,研究了棒材多相混合组织状态与相对衰减系数之间的关系.结果表明:该钢相对衰减系数值分布规律从大到小排列为含大量上贝氏体组织、片状珠光体+铁素体组织、珠光体球化组织.
参考文献
[1] | C. Hakan Gur;B. Orkun Tuncer .Characterization of microstructural phases of steels by sound velocity measurement[J].Materials Characterization,2005(2):160-166. |
[2] | 杨瑞成,王晖,羊海棠,陈奎,袁晓波.用Larson-Miller参数描述12Cr1MoV与 15CrMo的老化行为[J].材料科学与工艺,2002(04):395-398. |
[3] | Papadakis E P .Ultrasonic attenuation and velocity in AISI/SAE 52100 steel quenched from various temperatures[J].Metallurgical Transactions,1970,1:1053-1057. |
[4] | Smith R L;Reynolds W N;Wadley H N G .Ultrasonic attenuation and microstructure in low alloy steels[J].Metal Science Journal,1981,15:554-558. |
[5] | Berger H .Nondestructive characterization of materials[J].Materials Evaluation,1992,50:299-305. |
[6] | Ahn B.;Lee SS. .Effect of microstructure of low carbon steels on ultrasonic attenuation[J].IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control,2000(3):620-629. |
[7] | 李家伟;陈积懋.无损检测手册[M].北京:机械工业出版社,2002:224-237. |
[8] | 苏勇,林维正.用信号分析技术检测材料的声速和衰减[J].建筑材料学报,2001(01):65-69. |
[9] | Weimin Gao;Christ Glorieux;Silvio Elton Kruger;Kris van de Rostyne;Vitalyi Gusev;Walter Lauriks;Jan Thoen .Investigation of the microstructure of cast iron by laser ultrasonic surface wave spectroscopy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2001(1/2):170-179. |
[10] | 罗斯 J L;何存富;吴斌;王秀彦.固体中的超声波[M].北京:科学出版社,2004 |
[11] | Haines N F;Bell J C;Mclntyre P J .The application of broadband ultrasonic spectroscopy to the study of layered media[J].Journal of the Acoustical Society of America,1978,64(06):1645-1651. |
[12] | 邹龙江,杨冰,高路斯,李喜孟.抽油杆用钢30Mn2SiV拉伸脆断原因分析[J].机械工程材料,2006(09):70-72,75. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%