选取带有V型缺口45钢试样,通过控制加载过程中的应变幅,研究缺口对试样疲劳寿命的影响.并应用低周疲劳寿命预测理论,提出了修正的Manson寿命预测模型,用来预测带有V型缺口中45钢的低周疲劳寿命.模型的预测结果和试验结果吻合很好.
参考文献
| [1] | 张安哥;谢敏 .低周疲劳失效寿命估算[J].机械工程材料,1996,20(01):9-13. |
| [2] | 何国求,陈成澍,丁向群,徐瑞萱.新的非比例加载低周疲劳寿命估算方法[J].同济大学学报(自然科学版),2004(12):1637-1641. |
| [3] | Takamoto Itoh;Masao Sakane;Takahiro Hata .A design procedure for assessing low cycle fatigue life under proportional and non-proportional loading[J].International Journal of Fatigue,2006(5/6):459-466. |
| [4] | 魏庆同;郎福元.机械加工中的断裂设计理论[J].甘肃工业大学学报,1982(04):1-18. |
| [5] | 赵少汴;王忠保.疲劳设计[M].北京:机械工业出版社,1991:221-222. |
| [6] | Evans W J;Bache M R;Nicholas P J .The prediction of fatigue at notches in the near alpha titanium alloy timetal 834[J].International Journal of Fatigue,2001,23:S103-S109. |
| [7] | Eleiche A M;Megahed M M;Abd-Alah N M .Low-cycle fatigue in rotating cantilever under bending Ⅲ:experimental investigations on notched specimens[J].International Journal of Fatigue,2006,28:271-280. |
| [8] | M.M. Megahed;A.M. Eleiche;N.M. Abd-Allah .Low-cycle fatigue in rotating cantilever under bending Ⅰ: Theoretical analysis[J].International Journal of Fatigue,1996(6):401-412. |
| [9] | M.M. Megahed;A.M. Eleiche;N.M. Abd-Allah .Low-cycle fatigue in rotating cantilever under bending Ⅰ: Theoretical analysis[J].International Journal of Fatigue,1996(6):401-412. |
| [10] | Hitham M. Tlilan;Sugawara Yousuke;Majima Tamotsu .Effect of notch depth on strain-concentration factor of notched cylindrical bars under static tension[J].European journal of mechanics, A. Solids,2005(3):406-416. |
| [11] | 航空工业部科学技术委员会.应力集中系数手册[M].北京:高等教育出版社,1990:66-83. |
| [12] | 姚卫星.结构疲劳寿命分析[M].北京:国防工业出版社,2002:2-15,117-149. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%