用聚四氟乙烯(PTFE)和超细高岭土填充聚甲醛(POM),采用热模压成型工艺制备出四种不同成分的试样,在往复式滑动摩擦试验机上进行摩擦磨损试验,并对磨损表面形貌进行了分析.结果表明:只填充PTFE的复合材料的摩擦因数和磨损率较纯POM均有较大幅度的下降,7.5%高岭土与20%PTFE复合填充的复合材料摩擦因数最小,耐磨性最好;纯POM的磨损机制是粘着磨损和磨粒磨损,POM复合材料的磨损机制以粘着磨损为主.
参考文献
| [1] | 杨生荣,简令奇,王宏刚.聚甲醛润滑材料在摩擦学领域的研究进展[J].机械工程材料,2004(10):1-3,34. |
| [2] | Mens J W M;Gee A de W J .Friction and wear behavior of 18 polymers in contact with steel in environments of air and water[J].Wear,1991,149(1-2):255-268. |
| [3] | Huang Chi-Yuan;Chiang Wen-Yen .Synergistic effect of PTFE and sodium etched PTFE on polyacetal ternary blends[J].European Polymer Journal,1993,29(06):843-849. |
| [4] | Franklin S E;Kraker A .Investigation of counterface surface topography effect on the wear and transfer behaviour of a POM-20%PTFE composite[J].Wear,2003,255:766-773. |
| [5] | 王洪涛,杨生荣,薛群基.聚甲醛/聚四氟乙烯共混物的摩擦学性能研究[J].高分子材料科学与工程,1996(02):115-118. |
| [6] | D. Xiang;C. Gu .A study on the friction and wear behavior of PTFE filled with ultra-fine kaolin particulates[J].Materials Letters,2006(5):689-692. |
| [7] | Gong Guofang;Yang Huayong;Fu Xin .Tribological properties of kaolin filled UHMWPE composites in unlubricated sliding[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2004(1/2):88-94. |
| [8] | 龚国芳,杨华勇,傅新,漆宗能.UHMWPE/Kaolin复合材料的物性研究--机械性能、耐磨性及其相关关系[J].浙江大学学报(工学版),2003(03):299-302. |
| [9] | 王伟华,葛世荣.填料特性对尼龙摩擦学性能的影响及作用机理[J].中国矿业大学学报,2000(05):519-523. |
| [10] | 豆立新,龚烈航,沈健,吕振坚,龚天平,周键钊.复合材料添加剂对改性PTFE的摩擦转移膜的形成和稳定作用[J].复合材料学报,2004(02):65-69. |
| [11] | 王家序,陈战,秦大同.填料对聚四氟乙烯工程塑料改性的影响[J].机械工程材料,2002(10):35-37. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%