用粉末烧结法制备出了开孔型多孔铝及以Al2O3为增强相的铝基多孔复合材料,材料相对密度及孔径分别在0.25～0.40和100～400 μm范围内变化.对这两种多孔材料的压缩行为进行了研究.结果表明:Al/Al2O3复合材料有着比多孔铝更为有利的响应特征和更高的流动应力,该复合材料的压缩应力-应变曲线较为平坦,在与多孔铝相对密度相近时,屈服强度提高40%以上;经T6热处理,Al/Al2O3复合材料的屈服强度可进一步提高35%左右;此外,该复合材料的压缩行为具有明显的孔径依赖性,随孔径增大,流动应力升高,这主要与烧结过程中孔表面残留的气体有关.
参考文献
| [1] | John Banhart .Manufacture, characterization and application of cellular Metals and metal foams[J].Progress in materials science,2001(6):559-632. |
| [2] | 汤小东,孙斐,何德坪.孔结构参数对闭孔泡沫铝合金超声衰减性能的影响[J].机械工程材料,2006(10):59-61. |
| [3] | 吕艳凤,程和法,王强,戴光星,凤仪,胡芃.开孔泡沫铝导电性的研究[J].金属功能材料,2006(03):4-8. |
| [4] | 王录才,曾松岩,王芳.复合结构泡沫铝隔声性能的研究[J].机械工程材料,2006(10):56-58. |
| [5] | Fusheng Han;Hefa Cheng;Jinxiang Wang;Qiang Wang .Effect of pore combination on the mechanical properties of an open cell aluminum foam[J].Scripta materialia,2004(1):13-17. |
| [6] | A. R. Kennedy;S. Asavavisitchai .Effects of TiB_2 particle addition on the expansion, structure and mechanical properties of PM Al foams[J].Scripta materialia,2004(1):115-119. |
| [7] | Dorian K. Balch;David C. Dunand .Load partitioning In aluminum syntactic foams containing ceramic microspheres[J].Acta materialia,2006(6):1501-1511. |
| [8] | Y. Y. Zhao;T. Fung;L. P. Zhang .Lost Carbonate Sintering Process for Manufacturing Metal Foams[J].Scripta materialia,2005(4):295-298. |
| [9] | Y.Y.Zhao;D.X.Sun .A NOVEL SINTERING-DISSOLUTION PROCESS FOR MANUFACTURING Al FOAMS[J].Scripta materialia,2001(1):105-110. |
| [10] | Han F S;Zhu Z G;Gao J C .Compressive deformation and energy absorbing characteristic of foamed aluminum[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1998,29:2497-2502. |
| [11] | Gibson L J;Ashby M F;Schajer G S et al.The mechanics of two-dimensional cellular materials[J].Proceedings of the Royal Society of London,1982,382:25-42. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%