用FeNiCrSiB非晶合金箔作中间层,在氩气保护下采用瞬时液相扩散连接双温工艺对102/T91异种钢管进行了连接试验;对接头的显微组织和室温力学性能进行了分析测试.结果表明:在1260℃加热1min、1230℃等温4min、压力为6MPa条件下接头的组织与性能最理想,接头焊缝组织与基体组织相似,接头横剖面的界面为曲线状,接头抗拉强度达到母材水平.
参考文献
| [1] | 王尉才.12Cr2MOWVTiB与SA213-T91异种钢焊接工艺[J].西北电建,2006(02):29-30. |
| [2] | Illingworth T C;Golosnoy I O;Clyne T W .Modelling of transient liquid phase bonding in binary systems-A new parametric study[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2007,399(1-2):445-493. |
| [3] | Idowu OA;Richards NL;Chaturvedi MC .Effect of bonding temperature on isothermal solidification rate during transient liquid phase bonding of Inconel 738LC superalloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2005(1/2):98-112. |
| [4] | Brochu M;Pugh M D;Drew R A .Joining silicon nitride ceramic using a composite powder as active brazing alloy[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2004,374(1-2):34-42. |
| [5] | 张贵锋,张建勋,王士元,邱凤翔,杨永兴.日本液相扩散焊（TLP）钢管对焊技术研究近况[J].焊管,2003(05):56-60. |
| [6] | 陈思杰,赵丕峰.钢管TLP连接设备和技术[J].矿山机械,2005(01):58-60. |
| [7] | 陈思杰,井晓天,李辛庚.瞬时液相扩散连接的双温工艺模型[J].焊接学报,2005(04):69-72. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%