欢迎登录材料期刊网

材料期刊网

高级检索

用等离子体增强型化学气相沉积先得到非晶硅(a-Si:H)薄膜,再用卤钨灯照射的方法对其进行快速光热退火(RPTA),得到了多晶硅薄膜.然后,进行XRD衍射谱、暗电导率和拉曼光谱等的测量.结果发现,a-Si:H薄膜在RPTA退火中,退火温度在750℃以上,晶化时间需要2min,退火温度在650℃以下,晶化时间则需要2.5h;晶化后,晶粒的优先取向是(111)晶向;退火温度850℃时,得到的晶粒最大,暗电导率也最大;退火温度越高,晶化程度越好;退火时间越长,晶粒尺寸越大;光子激励在RPTA退火中起着重要作用.

参考文献

[1] 陈光华;邓金祥.新型电子薄膜材料[M].北京:化学工业出版社,2002:70.
[2] Jia S.;Geng XH.;Wang ZP.;Ge HC. .Preparation of thin film polycrystalline silicon on glass by photo-thermal annealing[J].Solar Energy Materials and Solar Cells: An International Journal Devoted to Photovoltaic, Photothermal, and Photochemical Solar Energy Conversion,2000(1/2):201-205.
[3] Pierson JF.;Jolly J.;Mencaraglia D.;Kim KS. .Crystallization of n-doped amorphous silicon PECVD films: comparison between SPC and RTA methods[J].Journal of Non-Crystalline Solids: A Journal Devoted to Oxide, Halide, Chalcogenide and Metallic Glasses, Amorphous Semiconductors, Non-Crystalline Films, Glass-Ceramics and Glassy Composites,2000(1/3):91-96.
[4] Singh R.;Poole KF.;Fakhruddin M. .Rapid photothermal processing as a semiconductor manufacturing technology for the 21st century[J].Applied Surface Science: A Journal Devoted to the Properties of Interfaces in Relation to the Synthesis and Behaviour of Materials,2000(1/4):198-203.
[5] 王阳元.多晶硅薄膜及其在集成电路中的应用[M].北京:科学出版社,2001
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%