本文采用有限元分析方法系统地研究了大尺寸SiC晶体PVT法生长装置中的加热组件不同的耦合间隙对生长系统中的感应磁场、感生电流和焦耳热的影响;分析比较了取不同的耦合间隙时系统达到热平衡状态所需时间的不同.得出了在中频电源的输出功率和频率都不变的前提下,在线圈匝数已固定的条件下,通过缩小耦合间隙可以提高系统的加热效率,缩短系统达到热平衡状态所需时间的结论.
参考文献
[1] | 陈治明;王建农.半导体器件材料物理学基础[M].北京:科学出版社,2003:360. |
[2] | Egorov Yu E et al.Modeling Analysis of Temperature Field and Species Transport Inside the System for Sublimation Growth of SiC in Tantalum Container[J].Materials Science Forum,1998,264:61. |
[3] | Pons M et al.State of the Art in the Modelling of SiC Sublimation Growth[J].Materials Science and Engineering,1999,B61:18. |
[4] | Ramm M S et al.Optimization of Sublimation Growth of SiC Bulk Crystals Using Modeling[J].Materials Science and Engineering,1999,B61:107. |
[5] | Bubner N.;Philip P.;Sprekels J.;Wilmanski K.;Klein O. .A transient model for the sublimation growth of silicon carbide single crystals[J].Journal of Crystal Growth,1999(3):294-304. |
[6] | 张群社,陈治明,蒲红斌,李留臣,封先锋,巩泽龙.SiC晶体PVT生长系统的流体力学模型及其有限元分析[J].人工晶体学报,2005(05):828-832. |
[7] | Klein O et al.Transient Numerical Investigation of Induction Heating during the Sublimation Growth of Silicon Carbide Single Crystals[J].Journal of Crystal Growth,2003,247:219. |
[8] | Lide D R.CRC Handbook of Chemistry and Physics[M].Boca Raton,USA:CRC Press,1995:267. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%