采用增加冷轧道次、提高中间退火温度等手段改进了传统高压阳极铝箔的生产工艺,以制备超薄型高压阳极铝箔.并用三维取向分布函数织构定量检测和扫描电子显微镜观察、研究了超薄型高压阳极铝箔的立方织构及其对腐蚀比电容的影响.结果表明,增加冷轧道次有利于铝箔的均匀变形并促进立方织构的生成,较高的中间退火温度可以促使最终退火过程中立方取向晶粒的形核,最终获得很强的立方织构.
参考文献
[1] | 毛卫民.金属材料的晶体学织构与各向异性[M].北京:科学出版社,2002 |
[2] | Chen N;Mao W;Yu Y.A Method of Quantitative Fiber Texture Analysis[A].Beijing:Inter Acad Publisher,1996:81-83. |
[3] | 毛卫民.高比电容低压阳极铝箔的表面微观组织[J].世界科技研究与发展,2004(03):16-21. |
[4] | Truszkowski W;Krol J;Major B .Inhomogeneitiy of RollingTexture in fcc Metals[J].Metallurgical and Materials Transactions,1980,11A:749-758. |
[5] | T.Kamijo;F.Seki .Significance of intermediate thermo-mechanical treatments for formation of cube texture in high purity aluminum foils[J].軽金属,1999(12):589-594. |
[6] | 杨平,毛卫民.Cube orientation in hot rolled high purity aluminum plate[J].中国有色金属学会会刊(英文版),2003(01):97-102. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%