根据国内外关于动态断裂力学性能的研究文献,对动态断裂韧性KId(JId)及止裂韧性的研究现状进行了概括总结.
参考文献
[1] | 高怡斐,张庄,苏杭,谈俊.550MPa级铜时效易焊接钢工程服役条件下的动态断裂力学行为表征[C].中国科协第二届优秀博士生学术年会论文集,2004:515-519. |
[2] | 禇武扬;林实;王棖.断裂韧性测试[M].北京:科学出版社,1979 |
[3] | Kobayashi T.Analysis of Impact Properties of A533 Steel for Nuclear Reactor Pressure Vessel by Instrumented Charpy Test[J].Engineering Fracture Mechanics,1984(19):49-65. |
[4] | 赵钦新.10Cr9Mo1VNb铁素体钢的动态断裂韧度[J].机械强度,1999(21):126-129. |
[5] | Guo W G;Li Y L;Liu Y Y.Analytical and Experimental Determination of Dynamic Impact Stress Intensity Factor for 40Cr Steel[J].Theoretical and Applied Fracture Mechanics,1997(26):29-34. |
[6] | Hai Qiu;Manabu Enoki;Yoshiaki Kawaguchi .A model for the dynamic fracture toughness of ductile structural steel[J].Engineering Fracture Mechanics,2003(5):589-598. |
[7] | 姜风春;刘瑞堂;刘殿魁.船用921A钢动态断裂韧性测试研究[J].实验力学,1999(14):96-100. |
[8] | Angamuthu K;Guha B;Achar D R G.Investigation ofDynamic Fracture Toughness(JId) Behaviour of Strength Mis-Matched Q & T Steel Weldments Using InstrumentedCharpy Impact Testing[J].Engineering Fracture Mechanics,1999(64):417-432. |
[9] | Guduru PR.;Ravichandran G.;Rosakis AJ.;Singh RP. .Dynamic crack initiation in ductile steels[J].Journal of the Mechanics and Physics of Solids,1998(10):1997-2016. |
[10] | Sumpter J D G;Caudrey A J.Recommended FractureToughness for Ship Hull Steel and Weld[J].Marine Structures,1995(08):345-357. |
[11] | 唐国翌 等.15MnV钢动态断裂韧性及韧-脆转变的分析[J].钢铁,1995,30:43-47. |
[12] | 杨才福;张永权;秦森 .钢中裂纹止裂[J].钢铁研究学报,1991,3(03):79-89. |
[13] | Bonenberger RJ.;Dally JW. .ON IMPROVEMENTS IN MEASURING CRACK ARREST TOUGHNESS[J].International Journal of Solids and Structures,1995(6/7):897-909. |
[14] | Kunin B I;Dearth R S.Evaluation of Statistical FractureToughness Parameters on the Basis of Crack Arrest Experment[J].Probabilistic Engineering Mechanics,1998(13):139-146. |
[15] | A.H. Priest .The influence of structural dimensions on crack arrest[J].Engineering Fracture Mechanics,2003(17):2421-2437. |
[16] | 铁素体钢平面应变止裂韧度Kia实验方法. 国家标准[S]. |
[17] | 杨才福,张永权,秦森.3.5%Ni低温钢裂纹止裂性能[J].钢铁钒钛,1991(01):18. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%