对近年来深冲钢板在织构研究方面如(1)铁素体区轧制的可行性及其工艺制度对变形织构的影响；(2)冷轧织构的组成；(3)再结晶织构与前续工序的关系及形成理论；4)织构在板材厚度方向的表现特点等作了评述。
参考文献
| [1] | 毛卫民;张新明.材料织构定量分析[M].北京:冶金工业出版社,1993 |
| [2] | Hiroshi TAKECHI .日本IF钢的发展趋势[J].武钢技术,1995,33(06):50-55. |
| [3] | R K Ray;J J Jonas;R K Hook .Cold Rolling and Annealing Textures in Low Carbon and Extra Low Carbon Steels[J].International Materials Reviews,1994,39(04):129-172. |
| [4] | M.R.BARNETT .Influence of Ferrite Rolling Temperature on Microstructure and Texture in Deformed Low C and IF Steels[J].ISIJ International,1997(7):697-705. |
| [5] | 张信钰.金属和合金的织构[M].北京:科学出版社,1976 |
| [6] | Saiji Matsuoka .Effect of Lubrication Condition on Recrystallization Texture of Ultra-low C Sheet Steel Hot-Rolled in Ferrite Region[J].ISIJ International,1998,38(06):633-639. |
| [7] | K.Eloot .Texture Evolution during Cold Rolling and Recrystallisation of IF Steel with a Strong {111} Hot Band Texture[J].ISIJ International,1998(6):602-609. |
| [8] | V Leroy .Frrite Hot Rolling of Thin Gauge Hot Strip[Z].Modern LC and ULC Sheets for Cold Forming,1998. |
| [9] | Takehide Senuma;Kaoru Kawasaki .Texture Formation in Ti-Bearing IF Steel Sheets Throughout the Rolling and Annealing Processes in Terms of the Influence of Hot Rolling Condition on Deep Drawability[J].ISIJ International,1994,34(01):51-60. |
| [10] | M.R.BARNETT .Influence of Ferrite Rolling Temperature on Microstructure and Texture in Deformed Low C and IF Steels[J].ISIJ International,1997(7):697-705. |
| [11] | M.R.BARNETT .Influence of Ferrite Rolling Temperature on Grain Size and Texture in Annealed Low C and IF Steels[J].ISIJ International,1997(7):706-714. |
| [12] | N.Hashimoto .Texture Evolution of IF Steel Due to Recrystallization[J].ISIJ International,1998(6):617-624. |
| [13] | M.R.Barnett .Role of In-grain Shear Bands in the Nucleation of <111>∥ND Recrystallization Textures in Warm Rolled Steel[J].ISIJ International,1998(1):78-85. |
| [14] | M. R. BARNETT .Formation of {111}<110> and {111}<112> Textures in Cold Rolled and Annealed IF Sheet Steel[J].ISIJ International,1999(9):923-929. |
| [15] | I. SAMAJDAR;B. VERLINDEN;P. VAN HOUTTE .Textural Changes through Grain Growth in Ti-bearing IF-steel Inves- tigated by Orientation Imaging Microscopy and X-ray Diffraction[J].ISIJ International,1997(10):1010-1015. |
| [16] | S Lanteri .Influence of Heating Rate on Recrystallization and Texture Formation in Ti-IF Steel[Z].Modern LC and ULC Sheet Steels for Cold Forming,1998. |
| [17] | H W Hessebarth;I R Gbel.[J].Acta Metallurgica et Materialia,1991 |
| [18] | Ph Tarvernier;J A Szpunar.[J].Acta Metallurgica et Materialia,1991 |
| [19] | 陈礼清 .无间隙原子钢再结晶织构的模拟与实验研究[D].沈阳:东北大学,1996. |
| [20] | 孙建伦 .IF钢退火过程中织构的研究[D].东北大学,1998. |
| [21] | 赵昆 .IF钢铁素体区热变形行为研究和铁素体轧制工艺开发[D].东北大学,1999. |
| [22] | 西村惠次.具有优良冲压成形性的超高r值冷轧钢板[J].世界钢铁,2000(03):58-60. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%