研究发现,非晶态Ni-P合金电镀体系中加入少量Fe,W等元素对镀层性能有影响,非晶态Ni-P镀层中引入少量Fe,W元素既能保护镀层优良的耐蚀性又可大大提高其硬度和耐磨性.
参考文献
| [1] | 涂抚洲;蒋汉瀛;陈文汩 等.电镀非晶态镍磷合金的研究[J].电镀与涂饰,1998,17(03) |
| [2] | 涂抚洲;蒋汉瀛;陈文汩.非晶态Ni-P合金镀液和镀层的稳定性[J].中南工业大学学报,1999(02) |
| [3] | Sridharan K;Sheppard K .Electrochemical characterization of Fe-Ni-P alloy electrodeposition[J].Journal of Applied Electrochemistry,1997,27:1198. |
| [4] | 高诚辉 .电镀Ni-Fe-P合金硬度控制[J].电镀与环保,1997,17(03) |
| [5] | Tianjue L;Zhao Yuan;Zhang Xushou.Effect of composition of electrodepositaed Fe-Ni-P alloys on the structure and wear resistance[J].Chinese Journal of Metal Science and Technology,1991(07) |
| [6] | 姚素薇.镍-钨-磷非晶态合金的电沉积方法及耐蚀性能的研究[J].材料保护,1994(03):9. |
| [7] | Hui W H;Liu J J;Dennis J K.Microstructure and hardness of brush plated Ni-Fe-W-P-S alloy[J].Journal of Applied Electrochemistry,1997(27) |
| [8] | M. Bratoeva;N. Atanassov .Nickel-tungsten alloy electrodeposition from a sulfamate electrolyte[J].Metal finishing,1998(6):92-99. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%