运用SEM、AES和XPS分析了Ni-P-SiC复合镀层的表面形貌及组成。研究显示：Ni-P-SiC 镀层的组成为(％)Ni 51.01、P 29.38、Si 3.64、C 3.88、O 0.75 和Fe 10.08时，镀层耐腐蚀能力较强。
The constituents and morphology of NiPSiC composite coating on steel were investigated by SEM AES and XPS. It was shown that the coating had good corrosion resistance while the compositions of the coating were51.01% Ni 29.38% P 3.88% C 3.64% Si 0.75% O and 10.08% Fe in relative atomic percentages.
参考文献
| [1] | 陈明贵.化学镀镍-磷-氟化石墨复合镀层工艺的研究[J].材料保护,1993(01):9. |
| [2] | 于光.化学镀（Ni-P）-MoS2复合镀层工艺研究[J].材料保护,1996(01):16. |
| [3] | 张永忠;孙克宁;姚玫 .化学镀Ni-P-PTFE的工艺研究[J].功能材料,1999,30(01):88-90. |
| [4] | 朱诚意;郭忠诚;刘中华 .国内复合镀层最新进展及应用[J].电镀与环保,1998,18(01):3-7. |
| [5] | Wagner C D;Riggs W M;Daris L E.Handbook of X-Ray Photoel ectron Spetroscopy[M].Minnesota: Perkin-Elmer Corporation,1979 |
| [6] | 王红艳;叶向荣;刘琴 等.钢铁表面Ni-Sn-P合金镀层组成及其耐蚀性[J].应用化学,1999,16(05):45-48. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%