传统的投加液体缓蚀剂防止油井管柱的腐蚀方法存在着增设加药泵、操作不便,高连续加注、用量大,效果差,防护周期短及生产成本大的问题.采用马来酸酐、癸二酸、油酸、二聚酸等原料分别与多胺合成双烷基双环咪唑啉季铵盐,并用静态失重法和高温高压动态模拟试验方法分别对原料进行了优选和缓蚀效率测试.结果表明:二聚酸为最优原料;合成的缓蚀剂基体成分在120 ℃,转速60 r/min,CO2饱和的条件下,添加量为300 mg/L时,缓蚀率达到80.3%.
参考文献
[1] | 郭稚弧.缓蚀剂及其应用[M].武汉:华中工学院出版社,1987 |
[2] | 王慧龙,郑家燊.环境友好缓蚀剂的研究进展[J].腐蚀科学与防护技术,2002(05):275-279. |
[3] | 张学元,柯克,杜元龙.咪唑啉酰胺在CO2溶液中铁表面上的吸脱附行为[J].中国腐蚀与防护学报,2000(06):344-348. |
[4] | Growcock F B;Lopp V R.Inhibitors of steel corrosion in hydrochloric acid inhibited 3-phenyl-2-propyn-1-01(PPO)[J].Corrosion Science,1988(28):387. |
[5] | Growcock F B;Frenier W W J .Kinetics of steel corrosion in hydrochloric acid inhibited with trems-cinnamaldehyde[J].Journal of the Electrochemical Society,1988,135(04):817. |
[6] | Frenier W W .Materials Development of a Ferric Ion Corrosion Inhibitor for Chemical Cleaning Applications[J].Materials Performance,1997,36(02):63. |
[7] | Quraishi MA.;Jamal D. .Corrosion inhibition of N-80 steel and mild steel in 15% boiling hydrochloric acid by a triazole compound - SAHMT[J].Materials Chemistry and Physics,2001(1/3):283-287. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%