流延法作为制备片层材料的重要工艺已经被陶瓷研究者广泛应用.但是,有机流延体系带来的环境污染、毒性及易燃性等问题已被社会所关注.因此,研究无毒、无污染的水基流延工艺已得到材料界的广泛重视.本文主要概述了国内外水基流延工艺的研究现状,重点介绍了PVA体系、丙烯酰胺凝胶流延体系、纤维素类粘结剂体系及乳胶体系的不同特点;从粘结剂、分散剂、增塑剂等多个角度分析了影响水基流延工艺的技术因素,并提出了很好的解决方法,最后介绍了乳胶体系水基流延工艺在制备片状或层状陶瓷材料方面的应用.
参考文献
| [1] | 贺连星;温廷琏;吕之奕.流延法制膜技术[J].化学通报(印刷版),1996(11):19-22. |
| [2] | Hotza D.;Greil P. .AQUEOUS TAPE CASTING OF CERAMIC POWDERS [Review][J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,1995(1/2):206-217. |
| [3] | 向军辉 .陶瓷片材水基凝胶快速固化流延成型新工艺的研究[D].清华大学,2001. |
| [4] | Kristoffersson A;Carlstrom E.Tape casting of alumina in water with acrylic latex binder[J].Journal of the European Ceramic Society,1997(17):289-297. |
| [5] | Doreau F;Tari G;Pagnoux C et al.Processing of aqueous tape-casting of alumina with acrylic emulsion binders[J].Journal of the European Ceramic Society,1998,18:311-321. |
| [6] | F.Doreau;G.Tari .Mechanical and lamination properties of alumina green tapes obtained by aqueous tape-casting[J].Journal of the European Ceramic Society,1999(16):2867-2873. |
| [7] | Pagnoux C;Doreau F;Tari G et al.Aqueous suspensions for tape casting based on acrylic binders[J].Journal of the European Ceramic Society,1998,18:241-247. |
| [8] | 崔学民,欧阳世翕,余志勇,汪长安,黄勇.LOM制造工艺在陶瓷领域的应用研究[J].陶瓷,2002(04):25-27. |
| [9] | Cawley D J;Feygin M;Medowski G D et al.Computer-aided manufacturing of laminated engineering materials[J].American Ceramic Society Bulletin,1996,75(05):75-79. |
| [10] | Donald Klosterman;Richard Chartoff;George Graves;Nora Osborne;Brian Priore .Interfacial characteristics of composites fabricated by laminated object manufacturing[J].Composites, Part A. Applied science and manufacturing,1998(9-10):1165-1174. |
| [11] | Cui X M;Ouyang SX;Huang Y et al.AStudy on LOM with water-based tape casting[J].Materials Letters,2003,57:1300-1304. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%