采用热压烧结工艺制备了B4C/SiCw陶瓷喷砂嘴,研究了SiC晶须的含量对B4C/SiCw陶瓷材料性能的影响.以SiC和Al2O3磨料对B4C/SiCw陶瓷喷砂嘴进行冲蚀磨损试验,研究不同磨料对B4C/SiCw陶瓷喷砂嘴冲蚀磨损的影响,分析了其冲蚀磨损机理.结果表明:B4C/SiCw陶瓷喷砂嘴的冲蚀磨损机理主要表现为脆性断裂和磨料粒子对喷嘴的切入所造成的微观切削作用.磨料的硬度和粒度对陶瓷喷嘴的磨损有重要的影响,磨料的硬度和粒度越大,陶瓷喷嘴的磨损速度加快.
参考文献
| [1] | RAYKOWSKI A;Hader M .Blasting cleaning of gas turbine components: deposit removal and substrate deformation[J].Wear,2001,249(02):127-132. |
| [2] | B. Djurovic;E. Jean;M. Papini;P. Tangestanian;J. K. Spelt .Coating removal from fiber-composites and aluminum using starch media blasting[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,1999(1):22-37. |
| [3] | Deng Jianxin;Lee Taichiu .Techniques for improved surface integrity and reliability of machined ceramic composites[J].Surface Engineering,2000,16(05):411-414. |
| [4] | 唐军;谭寿洪;陈忠明 .B4C-TiB2复相陶瓷的强韧化研究[J].无机材料学报,1997,12(02):169-174. |
| [5] | MAGNANI G;Beltrami G .Pressureless sintering and properties of SiC-B4C composite[J].Journal of the European Ceramic Society,2001,21(05):633-638. |
| [6] | Panek Z .The synthesis of SiC/B4C ceramics by combustion during hot pressing[J].Journal of the European Ceramic Society,1993,10(11):231-236. |
| [7] | Ingaki M .Research and development on carbon/ceramic composite in Japan[J].CARBON,1991,29(03):287-293. |
| [8] | Deng Jianxin;Zhou Jun;Feng Yihua .Microstructure and mechanical properties of hot-pressed B4C/(W,Ti)C ceramic composites[J].Ceramics International,2002,28(04):425-430. |
| [9] | Deng Jianxin;Feng Yihua;Ding Zeliang .Wear behaviors of the ceramic nozzles in sand blasting treatments[J].Journal of the European Ceramic Society,2003,23(02):323-329. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%