通过调整复相陶瓷中颗粒相的组成与级配,利用引入的热膨胀失配机制,控制莫来石/刚玉复相陶瓷显微结构,改善高温复相陶瓷热稳定性,着重研究了莫来石/刚玉复相陶瓷的热断裂特性.研究表明,全部采用莫来石颗粒相时,由于柱状莫来石颗粒极易发生热冲击穿晶断裂,且热膨胀失配导致的微裂纹较长,密度较小,故复相陶瓷热稳定性较差;全部采用刚玉颗粒相时,虽然基质相裂纹扩展至刚玉颗粒表面时穿晶断裂与沿晶的裂纹扩展同时发生,有利于改善复相陶瓷热稳定性,但由于热膨胀失配过度,未经热冲击时已产生宏观裂纹,故热稳定性最差.而采用莫来石/刚玉复合颗粒相,相比例为75/25制备的复相陶瓷试样,热膨胀失配形成的微裂纹较短,密度较大,其热稳定性最优.
参考文献
| [1] | TORRECILLAS R;Calderon J M;Moya J S .Suitability of mullite for high temperature applications[J].Journal of the European Ceramic Society,1999,19(08):2519-2527. |
| [2] | Hamidouche M;Bouaouadja N;Olagnon C et al.Thermal shock behaviour of mullite ceramic[J].Ceramics International,2003,29(06):599-609. |
| [3] | 李庭寿;钟香崇;孙庚辰 .莫来石-刚玉系材料的高温蠕变性能研究[J].硅酸盐通报,1989,8(03):1-8. |
| [4] | Sacks M D;Pask J A .Sintering of mullite- containing materials: 1. effect of composition[J].Journal of the American Ceramic Society,1982,65(01):65-72. |
| [5] | 李庭寿;孙庚辰;钟香崇.莫来石-刚玉系烧结材料的高温力学性能[J].耐火材料,1989(02):9-12. |
| [6] | Biswas N C;Chaudhuri S P .Comparative study of zirconia-mullite and alumina-zirconia composites[J].Bulletin of Materials Science,1999,22(01):37-45. |
| [7] | Aksel C .The role of fine alumina and mullite particles on the thermomechanical behavior of alumina-mullite refractory materials[J].Materials Letters,2002,57(03):708-714. |
| [8] | Hasselman D P H .Unified theory of thermal shock fracture initiation and crack propagation in brittle ceramics[J].Journal of the American Ceramic Society,1969,52(11):600-604. |
| [9] | 王文堂;苗金山.菁青石-莫来石窑具热稳定性与显微结构关系的研究[J].陶瓷,1995(04):41-45. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%