通过高能球磨实现的超细粉碎过程使固体颗粒晶粒细化,产生微裂纹、晶格畸变、表面能升高、反应能力增强,从而实现低温化学反应,称为机械力化学.此法开辟了制备材料的新途径,因而得到广泛重视.本文综述了机械力化学原理及其在制备纳米复合材料、纳米陶瓷材料和纳米合金材料中的应用以及工艺控制因素.介绍了机械力化学法的发展现状及其优缺点.
参考文献
[1] | Jose F. Fernandez-Bertran .Mechanochemistry: an overview[J].Pure and Applied Chemistry,1999(4):581-586. |
[2] | Peters K .Mechanochemische reaktionen[M].Symposion Zerkleinern,1962,43(05):78-98. |
[3] | 曾凡;胡永明.矿物加工颗粒学[M].徐州:中国矿业大学出版社,1995:153-177. |
[4] | 卢迪芬,魏诗榴.用粉碎法制备超微颗粒时添加助磨剂的作用[J].华南理工大学学报(自然科学版),1989(01):88. |
[5] | 陈小华,成奋强,王健雄,谢中,彭景翠,吴国涛.机械球磨下石墨结构的畸变[J].无机材料学报,2002(03):579-584. |
[6] | 张云洪;张庆今;魏诗榴 .PbO和TiO3混合粉磨的机械力化学反应和化学变化[J].硅酸盐学报,1989,17(05):324-327. |
[7] | Lu Difen;Wei Shiliu .Performance and analysis of a planetary vibration mill[J].Advances in Powder Technology,1992,3(02):1587-1595. |
[8] | 席生岐,屈晓燕,刘心宽,马明亮,周敬恩,王笑天.高能球磨固态扩散反应研究[J].材料科学与工艺,2000(03):88-91. |
[9] | Claus B;Hanspeter H .Analysis of crystalline distortion[J].Powder Technology,1984,32(03):443-458. |
[10] | Urakaev FK.;Boldyrev VV. .Mechanism and kinetics of mechanochemical processes in comminuting devices - 1. Theory[J].Powder Technology,2000(1/2):93-107. |
[11] | Niihara K .New concept of ceramics - ceramics[J].Journal of the Ceramic Society of Japan,1991,99(10):974-986. |
[12] | Jianlin Li;Fei Li;Keao Hu .Formation of titanium carbide/aluminum oxide nanocomposite powder by high-energy ball milling and subsequent heat treatment[J].Journal of the American Ceramic Society,2002(11):2843-2845. |
[13] | Jayashankar S;Kavfman M J .Formation of SiC/MoSi2 composite by mechanical alloying and subsequent hot pressing[J].Scripta Metallurgica et Materialia,1992,26(02):1245-1248. |
[14] | 吴其胜,高树军,张少明,杨南如.BaTiO3纳米晶机械力化学合成[J].无机材料学报,2002(04):719-724. |
[15] | 吴其胜,张少明.机械力化学合成CaTiO3纳米晶的研究[J].硅酸盐学报,2001(05):479-483. |
[16] | Ikesue A;Furusato I .Mechanical property of inorganic materials[J].Journal of the American Ceramic Society,1995,78(04):225-228. |
[17] | Han K R;Koo H J;Lim C S .Thermal conduction of different materials[J].Journal of the American Ceramic Society,1999,82(04):478-481. |
[18] | Ramanathan S;Roy S K;Bhat J .Analysis of laser and optical materials[J].Journal of Materials Science Letters,2001,20(10):2119-2121. |
[19] | S.N. Patankar;D. Zhang;G. Adam .Processing of yttrium-aluminum garnets under non-equilibrium conditions[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2003(1/2):307-309. |
[20] | Mahmoud Zawrah;Leon Shaw .Microstructure and hardness of nanostructured Al-Fe-Cr-Ti alloys through mechanical alloying[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2003(1/2):37-49. |
[21] | 李岩,刘心宇.MoSi2球磨工艺的探讨[J].稀有金属与硬质合金,2000(03):11-13,30. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%