通过常压烧结制备了Al2O3/Y-TZP复相陶瓷,研究了Al2O3含量对材料力学性能及耐磨性的影响.体积分数为35%Al2O3的Al2O3/Y-TZP复相陶瓷具有相对高的韧性(12.5 MPa·m1/2)和较低的磨损率(9.2×10-6mm3/(m·N)).
参考文献
[1] | 徐明霞;段仁宫 .Al2O3添加量对Y-TZP陶瓷烧结及力学性能的影响[J].硅酸盐通报,1997,16(04):40-42. |
[2] | TsuKuma K;Ueda K;Shimada M .Strength and fracture toughness of isostatically hot-pressed composites of Al2O3 and Y2O3-partially-stabillized ZrO2[J].Journal of the American Ceramic Society,1985,68:4-5. |
[3] | Mikio F .Properties of[Y]-ZrO2-Al2O3 and[Y]-ZrO2 -Al2O3-[Ti or Si] C composition[J].Journal of the American Ceramic Society,1989,72(02):236-242. |
[4] | Shi J L;Li B S;Yen T S .Mechanical properties of Al2O3 particle-Y-TZP matrix composite and its toughening mechanism[J].Journal of Materials Science,1993,28:4019-4022. |
[5] | 李秀华,袁启明,杨正方,周振君.添加Al2O3的Y-TZP基陶瓷材料研究及其应用前景[J].硅酸盐通报,2002(03):35-39. |
[6] | 王东方;毛志远 .四方氧化锆多晶瓷的磨料磨损[J].硅酸盐学报,1995,25(05):518-524. |
[7] | Chih-Chung T. Yang;Wen-Cheng J. Wei .Effects of material properties and testing parameters on wear properties of fine-grain zirconia (TZP)[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2000(1/2):97-104. |
[8] | He Yingjie;Winnubst L;Anthonie J .Grain-size dependence of sliding wear in tetragonal zirconia polycrystals[J].Journal of the American Ceramic Society,1996,79(02):3090-3096. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%