用高岭土、Al2O3粉和SiC粉末为原料,活性碳为造孔剂制备莫来石/SiC多孔陶瓷.测定了试样的显气孔率、气孔孔径分布和抗弯强度,并分别用XRD和SEM分析晶相组成和断面显微结构.结果表明:莫来石的理论设计质量的分数小于10%时,莫来石/SiC多孔陶瓷的显气孔率随其设计量的增多而急剧降低;莫来石理论设计量继续增加时,试样显气孔率缓慢降低并趋于稳定.气孔孔径随莫来石设计量的增加而急剧减小.抗弯强度随莫来石设计量的增加而先增大,在莫来石理论设计量为20%时达到最大值,此后逐渐降低.SEM分析结果表明:与其他试样相比,莫来石设计量为40%的试样中存在较多的多孔"微区".
参考文献
[1] | Marina M .Porous SiC -prospective applications[J].Materials Research Society Symposium-Proceedings,2002,742:309-320. |
[2] | Danishevskii AM.;Sitnikova AA.;Shuman VB.;Suvorova AA.;Zamoryanskaya MV. .TEM and cathodoluminescence studies of porous SiC[J].Semiconductor Science and Technology,1998(10):1111-1116. |
[3] | HAO WANG;INKYUNG SUNG;XIAODONG LI;DONGPYO KIM .Fabrication of Porous SiC Ceramics with Special Morphologies by Sacrificing Template Method[J].Journal of porous materials,2004(4):265-271. |
[4] | Raghothamachar;Balaji B J;Vetter W M et al.Characterization of porous SiC substrates and of the epilayer structures grown on them[J].Materials Research Society Symposium-Proceedings,2002,742:109-114. |
[5] | Shishkin Y;Ke Y;Devaty RP;Choyke WJ .Fabrication and morphology of porous p-type SiC[J].Journal of Applied Physics,2005(4):4908-1-4908-5-0. |
[6] | Weiguang Chi;Dongliang Jiang;Zhengren Huang .Sintering behavior of porous SiC ceramics[J].Ceramics International,2004(6):869-874. |
[7] | 张锐,高濂,程国峰,郭景坤.注浆成型SiC多孔陶瓷的工艺和性能研究[J].无机材料学报,2002(04):725-730. |
[8] | Kim B H;Na Y H .Fabrication of fiber-reinforced porous ceramics of Al2O3-Mullite and SiC-Mullite system[J].Ceramics International,1995,21:381-384. |
[9] | Tian J;Shobu K .Fracture strength of melt-infiltrated SiC-mullite composite[J].Journal of Materials Science,2004(11):3751-3755. |
[10] | Zhu XW.;Jiang DL.;Tan SH. .Preparation of silicon carbide reticulated porous ceramics[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2002(1/2):232-238. |
[11] | She JH.;Ohji T. .Fabrication and characterization of highly porous mullite ceramics[J].Materials Chemistry and Physics,2003(3):610-614. |
[12] | Ya-Fei Liu;Xing-Qin Liu;Hui Wei;Guang-Yao Meng .Porous mullite ceramics from national clay produced by gelcastion[J].Ceramics International,2001(1):1-7. |
[13] | Rice R W .Comparison of stress concentration versus minimum solid area based mechanical properties-porosity relation[J].Journal of Materials Science,1993,28:2187. |
[14] | Liu D M .Influence of porosity and pore size on the compressive strength of porous hydroxyapatite ceramic[J].Ceramics International,1997,23(02):135-139. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%