欢迎登录材料期刊网

材料期刊网

高级检索

非氧化物材料因具有高熔点、高强度及优良的化学稳定性等优点而受到研究人员的普遍关注。综述了溶胶-凝胶(sol-gel)工艺制备非氧化物超细粉体的研究现状,总结了sol-gel工艺制备非氧化物超细粉体的优缺点,并提出了该技术今后潜在的发展方向。

The non-oxide materials have attracted considerable attentions because of its high melting point, high strength and excellent chemical stability and many other advantages.In this paper,the research sta-tus of non-oxide ultra-fine powders prepared by sol-gel was summarized,the advantages and disadvanta-ges of the sol-gel technology were introduced,and the potential development direction on the sol-gel technology was proposed.

参考文献

[1] 苏新禄,陈卫武,王佩玲,程一兵.非氧化物透明陶瓷的研究进展[J].无机材料学报,2003(03):520-526.
[2] 张艳利,谢朝晖,李志刚,贾全利.复合型耐火原料的研究进展[J].耐火材料,2013(4):298-302.
[3] 钟香崇.产学研结合,发展有中国特色的优质耐火材料[J].耐火材料,2009(01):1-4.
[4] 陈肇友.ZrB2质与TiB2质耐火材料[J].耐火材料,2000(04):224-229.
[5] 徐圣,王玺堂.Al2O3-SiC复相陶瓷材料制备方法的研究现状[J].耐火材料,2007(02):141-143.
[6] Tsutomu Minami .Advanced sol-gel coatings for practical applications[J].Journal of Sol-Gel Science and Technology,2013(1):4-11.
[7] Dasog, M.;Veinot, J.G.C. .Solid-state synthesis of luminescent silicon nitride nanocrystals[J].Chemical communications,2012(31):3760-3762.
[8] 陈宏,穆柏春,赵连俊.溶胶凝胶-碳热还原法制备Si3N4纳米粉末[J].粉末冶金技术,2009(02):114-118.
[9] Juanli Yu;Hongjie Wang;Jian Zhang .Gelcasting preparation of porous silicon nitride ceramics by adjusting the content of monomers[J].Journal of Sol-Gel Science and Technology,2010(3):515-523.
[10] B. Matovic;B. Babic;A. Devecerski;M. Radovic;A. Minovic;M. Miljkovic;S. Boskovic .New synthetic route for nanocrystalline boron nitride powder[J].Materials Letters,2011(2):307-309.
[11] 薛跃军,梁西瑶,高晓菊,满红,李爱民,燕东明.自蔓燃方法制备氮化物陶瓷粉体研究进展[J].硅酸盐通报,2010(06):1373-1379.
[12] 李吉利,蒋明学.TiN粉末的制备方法[J].耐火材料,2011(05):386-389.
[13] 于仁红,蒋明学.TiN的性质、用途及其粉末制备技术[J].耐火材料,2005(05):386-389.
[14] 刘海涛,闵鑫,姬海鹏,徐友果,房明浩,刘艳改,黄朝晖.金红石和铝灰铝热还原氮化合成TiN-Al2O3的物相研究[J].耐火材料,2013(02):101-103.
[15] 吴锋,李志坚,陈俊红,亓华涛.碳热还原氮化合成TiN的研究[J].耐火材料,2006(02):89-91.
[16] Wanli Wang;Oumarou Savadogo;Zi-Feng Ma .Preparation of new titanium oxy nitride based electro catalysts using an anhydrous sol-gel method for water electrolysis in acid medium[J].International journal of hydrogen energy,2012(9):7405-7417.
[17] Zhang H J;Li F L;Jia Q L .Preparation of titanium nitride ultrafinepowders by microwave carbothermal reduction nitridation methods[J].CERAMICS INTERNATIONAL,2009,35(03):1071-1075.
[18] 贾晓林,张海军,陈俊锋,杨道媛,刘战杰.溶胶-凝胶还原氮化合成β-sialon超细粉[J].硅酸盐学报,2004(08):925-929.
[19] 付芳,贾晓林,张海军.溶胶-凝胶和微波碳热还原氮化法合成β-sialon超细粉[J].硅酸盐学报,2007(03):317-321.
[20] Pradeilles N;Record MC;Granier D et al.Synthesis of β-SiAlON:A combined method using sol-gel and SHS processes[J].CeramInt,2008,34(05):1189-1194.
[21] 丽丽,张骋,冯涛,徐海芳,李强.超细Eu2+掺杂β-Sialon荧光粉的合成及表征[J].中国稀土学报,2011(03):383-386.
[22] Li L;Zhang C;Jiang D Y et al.Luminescence properties of Eu2 +doped β-SiAlON phosphor[J].Key Engineering Materials,2012,492:320-323.
[23] 付芳,贾晓林,张海军.微波助溶胶-凝胶碳热还原合成SiC超细粉[J].稀有金属材料与工程,2008(z1):153-155.
[24] Jie Xu;Yong-Mei Liu;Bing Xue .A hybrid sol-gel synthesis of mesostructured SiC with tunable porosity and its application as a support for propane oxidative dehydrogenation[J].Physical chemistry chemical physics: PCCP,2011(21):10111-10118.
[25] Biljana Babic;Dusan Bucevac;Anja Dosen .New manufacturing process for nanometric SiC[J].Journal of the European Ceramic Society,2012(9):1901-1906.
[26] Haijun Zhang;Faliang Li;Quanli Jia .Preparation of titanium carbide powders by sol-gel and microwave carbothermal reduction methods at low temperature[J].Journal of Sol-Gel Science and Technology,2008(2):217-222.
[27] Navin Chandra;Meenakshi Sharma;Deepesh Kumar Singh;S.S. Amritphale .Synthesis Of Nano-tic Powder Using Titanium Gel Precursor And Carbon Particles[J].Materials Letters,2009(12):1051-1053.
[28] Jie Zhong;Shuquan Liang;Juan Zhao .Formation of novel mesoporous TiC microspheres through a sol-gel and carbothermal reduction process[J].Journal of the European Ceramic Society,2012(12):3407-3414.
[29] Chunlei Yan;Rongjun Liu;Yingbin Cao .Synthesis of submicrometer zirconium carbide formed from inorganic-organic hybrid precursor pyrolysis[J].Journal of Sol-Gel Science and Technology,2012(1):251-256.
[30] Mickael Dolle;Dominique Gosset;Christine Bogicevic .Synthesis of nanosized zirconium carbide by a sol-gel route[J].Journal of the European Ceramic Society,2007(1):2061-2067.
[31] Chunlei Yan;Rongjun Liu;Yingbin Cao .Carbothermal Synthesis of Submicrometer Zirconium Carbide from Polyzirconoxane and Phenolic Resin by the Facile One-Pot Reaction[J].Journal of the American Ceramic Society,2012(11):3366-3369.
[32] Caen Ang;Tim Williams;Aaron Seeber .Synthesis and Evolution of Zirconium Carbide via Sol-Gel Route: Features of Nanoparticle Oxide-Carbon Reactions[J].Journal of the American Ceramic Society,2013(4):1099-1106.
[33] 张勇,何新波,曲选辉,段柏华.超高温材料的研究进展及应用[J].材料导报,2007(12):60-64.
[34] 张国军,邹冀,倪德伟,刘海涛,阚艳梅.硼化物陶瓷:烧结致密化、微结构调控与性能提升[J].无机材料学报,2012(03):225-233.
[35] Eubos Baca;Zoltan Lences;Nils Stelzer .Phase, microstructure evolution and sintering of Sr-doped TiB_2 precursors[J].Journal of the European Ceramic Society,2011(8):1465-1471.
[36] E. Baca;N. Stelzer .Adapting of sol-gel process for preparation of TiB_2 powder from low-cost precursors[J].Journal of the European Ceramic Society,2008(5):907-911.
[37] Haijun Zhang;Faliang Li .Preparation and microstructure evolution of diboride ultrafine powder by sol-gel and microwave carbothermal reduction method[J].Journal of Sol-Gel Science and Technology,2008(2):205-211.
[38] Yongjie Yan;Zhengren Huang;Shaoming Dong .Pressureless Sintering of High-Density ZrB_2-SiC Ceramic Composites[J].Journal of the American Ceramic Society,2006(11):3589-3592.
[39] Hui Zhang;Yongjie Yan;Zhengren Huang;Xuejian Liu;Dongliang Jiang.Pressureless Sintering of ZrB_2-SiC Ceramics Incorporating Sol-gel Synthesized Ultra-fine Ceramic Powders[J].Key engineering materials,2010:193-196.
[40] 闫永杰,张辉,黄政仁,刘学建.常压烧结ZrB2-SiC复相材料的抗氧化行为研究[J].无机材料学报,2009(03):631-635.
[41] Li-Juan YANG,Shi-Zhen ZHU,Qiang XU,Zhen-Yu YAN,Ling LIU.Synthesis of ultrafine ZrB2 powders by sol-gel process[J].中国高等学校学术文摘·材料科学,2010(03):285-290.
[42] Li R X;Zhang Y;Zhou H J et al.Synthsis of ZrB2 nano-particles bysol-gel mthod[J].J Sol-Gel Sci Tech,2011,58(05):580-585.
[43] 张云,李锐星,姜沿杉,赵斌,李军平,冯志海.湿化学法合成纳米ZrB2粉末[J].无机化学学报,2011(09):1788-1792.
[44] Zhang, Y.;Li, R.;Jiang, Y.;Zhao, B.;Duan, H.;Li, J.;Feng, Z. .Morphology evolution of ZrB_2 nanoparticles synthesized by solgel method[J].Journal of Solid State Chemistry,2011(8):2047-2052.
[45] Ji H M;Ji G Y;Li X P .Effects of sol network modifiers on prepara-tion,morphology and phase composition of zirconium diboride nano-powders by novel sol-gel technology[J].Key Engineering Materials,2013,544:139-143.
[46] Hong Youl Ryu;H.H. Nersisyan;Jong Hyeon Lee .Preparation of zirconium-based ceramic and composite fine-grained powders[J].International Journal of Refractory Metals & Hard Materials,2012(Jan.):133-138.
[47] 徐广平,何江荣,宋一华,魏赛,冯伟,谢志鹏.热压烧结Al2O3-ZrB2-SiC复相陶瓷的高温力学性能研究[J].耐火材料,2013(03):184-186,189.
[48] J. Ramirez-Rico;M.A. Bautista;J. Martinez-Fernandez .Compressive strength degradation in ZrB_2-based ultra-high temperature ceramic composites[J].Journal of the European Ceramic Society,2011(7):1345-1352.
[49] Che X P;Zhu S Z;Yang L J et al.Solution-based synthesis of ultra-fine ZrB2 powders and ZrB2-SiC composite powders[J].Adv MaterRes,2010,105:213-217.
[50] 闫永杰,张辉,黄政仁,刘学建,董绍明.无机盐溶胶-凝胶法制备超细ZrB2-ZrC复合粉体[J].无机材料学报,2008(04):815-818.
[51] Ang C;Seeber A;Wang K et al.Modification of ZrB2 powders by asol gel ZrC precursor-A new approach for ultra high temperatureceramic composites[J].J Asian Ceram Soc,2013,1(01):77-85.
[52] A. Rabiezadeh;A.M. Hadian;A. Ataie .Preparation of alumina/titanium diboride nano-composite powder by milling assisted sol-gel method[J].International Journal of Refractory Metals & Hard Materials,2012(Mar.):121-124.
[53] Jie Zhong;Shuquan Liang;Kun Wang .Synthesis of Mesoporous Carbon-Bonded TiC/SiC Composites by Direct Carbothermal Reduction of Sol-Gel Derived Monolithic Precursor[J].Journal of the American Ceramic Society,2011(11):4025-4030.
[54] Rajbeer Sharma;D.V. Sridhara Rao;V.D. Vankar .Growth of nanocrystalline β-silicon carbide and nanocrystalline silicon oxide nanoparticles by sol gel technique[J].Materials Letters,2008(17/18):3174-3177.
[55] A. Biedunkiewicz .Manufacturing of ceramic nanomaterials in Ti-Si-C-N system by sol-gel method[J].Journal of Sol-Gel Science and Technology,2011(3):448-455.
[56] Umalas M;Reedo V;Lohmus A et al.Synthesis of ZrC-TiC blendby novel combination of sol-gel method and carbothermal reduction[J].Key Engineering Materials,2012,527:62-67.
[57] Malik Adeel Umer;Hee Sub Park;Dong Ju Lee .A sol-gel route to nanocrystalline TiN coated cubic boron nitride particles[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2011(41):9764-9769.
[58] Umer, M.A.;Sub, P.H.;Lee, D.J.;Ryu, H.J.;Hong, S.H..Polycrystalline cubic boron nitride sintered compacts prepared from nanocrystalline TiN coated cBN powder[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2012:151-156.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%