欢迎登录材料期刊网

材料期刊网

中国科学院金属研究所 科学出版社
高级检索
  1. 首页
  2. 期刊
  3. 耐火材料
  4. 熔盐法合成非氧化物陶瓷粉体

耐火材料 , 2015, (3): 232-237. doi: 10.3969/j.issn.1001-1935.2015.03.019

熔盐法合成非氧化物陶瓷粉体

黄仲 1, , 焦成鹏 2, , 张少伟 3, , 张海军 4, , 李发亮 5, , 鲁礼林 6,

1.武汉科技大学 省部共建耐火材料与冶金国家重点实验室 湖北武汉 430081

2.武汉科技大学 省部共建耐火材料与冶金国家重点实验室 湖北武汉 430081; 武汉科技大学 冶金矿产资源高效利用与造块湖北省重点实验室 湖北武汉 430081

3.武汉科技大学 省部共建耐火材料与冶金国家重点实验室 湖北武汉 430081

4.武汉科技大学 省部共建耐火材料与冶金国家重点实验室 湖北武汉 430081

5.武汉科技大学 省部共建耐火材料与冶金国家重点实验室 湖北武汉 430081

6.武汉科技大学 省部共建耐火材料与冶金国家重点实验室 湖北武汉 430081

基金项目:   国家自然科学基金面上项目(51272188，51472184，51472185)；973计划前期研究专项(2014CB660802)；湖北省自然科学基金重点项目(2013CFA086)；湖北省科技支撑计划对外科技合作项目(2013BHE002)资助。  

关键词： 熔盐法 , 非氧化物 , 陶瓷粉体

Non-oxide ceramic powders synthesized by molten salt method

Keywords： molten salt method , non-oxide , ceramic powders

非氧化物陶瓷具有优良的抗热震性、抗侵蚀性及高温力学性能，在很多领域有着广阔的应用前景。熔盐法在制备高纯、超细以及结构可控的非氧化物陶瓷粉体方面有着非常明显的优势。综述了近年来熔盐法制备非氧化物陶瓷粉体的研究现状，指出了熔盐法合成非氧化物陶瓷粉体的下一步研究重点。

Non-oxide ceramic products are widely used in many fields for their excellent thermal shock re-sistance,corrosion resistance and high temperature mechanical properties.The molten salt method has clear advantages in the synthesis of non-oxide ceramic powders with high purity,small average size and controllable structure.The recent development of non-oxide ceramic powders synthesized by the molten salt method was reviewed,and the next research priorities were pointed out.

参考文献

[1] 张艳利,谢朝晖,李志刚,贾全利.复合型耐火原料的研究进展[J].耐火材料,2013(4):298-302.
[2] 王志强,朱伯铨,方斌祥.纳米TiC对低碳MgO-C砖抗氧化性及热导率的影响[J].耐火材料,2008(06):409-412.
[3] 李朝云,涂军波,魏军从.Si3N4加入量对Al2O3-SiC-C铁沟浇注料性能的影响[J].耐火材料,2009(04):260-262.
[4] Eric W. Neuman;Gregory E. Hilmas;William G. Fahrenholtz .Mechanical behavior of zirconium diboride-silicon carbide ceramics at elevated temperature in air[J].Journal of the European Ceramic Society,2013(15/16):2889-2899.
[5] Derek S. King;William G. Fahrenholtz;Greg E. Hilmas .Silicon carbide-titanium diboride ceramic composites[J].Journal of the European Ceramic Society,2013(15/16):2943-2951.
[6] Mark M. Opeka;Inna G. Talmy .Mechanical, Thermal, and Oxidation Properties of Refractory Hafnium and Zirconium Compounds[J].Journal of the European Ceramic Society,1999(13/14):2405-2414.
[7] Verdon, C.;Szwedek, O.;Jacques, S.;Allemand, A.;Le Petitcorps, Y..Hafnium and silicon carbide multilayer coatings for the protection of carbon composites[J].Surface & Coatings Technology,2013:124-129.
[8] Bin Li;Yong-Cai Song;Chang-Rui Zhang .Synthesis and characterization of nanostructured silicon carbide crystal whiskers by sol-gel process and carbothermal reduction[J].CERAMICS INTERNATIONAL,2014(8 Pt.A):12613-12616.
[9] 曹迎楠,杜爽,张海军,张少伟,张振聪.溶胶-凝胶工艺制备非氧化物超细粉体的研究现状[J].耐火材料,2014(04):302-306.
[10] 李吉利,蒋明学.TiN粉末的制备方法[J].耐火材料,2011(05):386-389.
[11] 马爱琼,蒋明学.碳热还原法合成TiB2的热力学分析与研究[J].耐火材料,2009(02):96-99.
[12] Yoshida, N.;Terazawa, S.;Hayashi, K.;Hamaguchi, T.;Natsuhara, H.;Nonomura, S. .A narrow process window for the preparation of polytypes of microcrystalline silicon carbide thin films by hot-wire CVD method[J].Journal of Non-Crystalline Solids: A Journal Devoted to Oxide, Halide, Chalcogenide and Metallic Glasses, Amorphous Semiconductors, Non-Crystalline Films, Glass-Ceramics and Glassy Composites,2012(17):1987-1989.
[13] Liang Shi;Yunle Gu;Luyang Chen .Formation of nanocrystalline BN with a simple chemical route[J].Materials Letters,2004(26):3301-3303.
[14] Ji H M;Yang M;Li M M et al.Low-temperature synthesis of ZrB2 nano-powders using a sorbitol modified sol -gel processing route[J].ADVANCED POWDER TECHNOLOGY,2014,25(3):910 -915.
[15] J. K. Sonber;A. K. Suri .Synthesis and consolidation of zirconium diboride: review[J].Advances in Applied Ceramics,2011(6):321-334.
[16] Li Z;Zhang S W;W E Lee .Molten salt synthesis of LaAlO3 powder at low temperatures[J].Journal of the European Ceramic Society,2007,27(10):3201 -3205.
[17] Zushu Li;William Edward Lee;Shaowei Zhang .Low-Temperature Synthesis of CaZrO_3 Powder from Molten Salts[J].Journal of the American Ceramic Society,2007(2):364-368.
[18] Jayaseelan D D;Zhang S W;Hashimoto S et al.Template formation of magnesium aluminate(MgAl2 O4)spinel microplatelets in molten salt[J].Journal of the European Ceramic Society,2007,27(16):4745 -4749.
[19] Zushu Li;Shaowei Zhang;William Edward Lee .Molten salt synthesis of zinc aluminate powder[J].Journal of the European Ceramic Society,2007(12):3407-3412.
[20] Shaowei Zhang;Daniel Doni Jayaseela;Goutam Bhattacharya .Molten Salt Synthesis of Magnesium Aluminate (MgAl_2O_4) Spinel Powder[J].Journal of the American Ceramic Society,2006(5):1724-1726.
[21] Xie W;Mobus G;Zhang S W .Molten salt synthesis of silicon car-bide nanorods using carbon nanotubes as templates[J].Journal of Materials Chemistry,2011,21(45):18325 -18330.
[22] Jun Ding;Chengji Deng;Wenjie Yuan .Novel synthesis and characterization of silicon carbide nanowires on graphite flakes[J].CERAMICS INTERNATIONAL,2014(3):4001-4007.
[23] Xuanke Li;Aidan Westwood;Andy Brown .A convenient,general synthesis of carbide nanofibres via templated reactions on carbon nanotubes in molten salt media[J].Carbon: An International Journal Sponsored by the American Carbon Society,2009(1):201-208.
[24] Ye J K;Zhang S W;Lee W E .Novel low temperature synthesis and characterization of hollow silicon carbide spheres[J].Microporous and Mesoporous Materials,2012,152(1):25 -30.
[25] Ruisong Yang;Lishan Cui;Yanjun Zheng .Molten salt synthesis of Mo_2C powder using a mechanically milled powder[J].Materials Letters,2007(26):4815-4817.
[26] Ruisong Yang;Tingyong Xing;Renbo Xu .Molten salt synthesis of tungsten carbide powder using a mechanically activated powder[J].International Journal of Refractory Metals & Hard Materials,2011(1):138-140.
[27] Wei Xie;Zakaria Mirza;Guenter Mobus .Novel Synthesis and Characterization of High Quality Silicon Carbide Coatings on Carbon Fibers[J].Journal of the American Ceramic Society,2012(6):1878-1882.
[28] Jianke Ye;Shaowei Zhang;William E. Lee .Molten salt synthesis and characterization of SiC coated carbon black particles for refractory castable applications[J].Journal of the European Ceramic Society,2013(10):2023-2029.
[29] Li XK;Dong ZJ;Westwood A;Brown A;Zhang SW;Brydson R;Li N;Rand B .Preparation of a titanium carbide coating on carbon fibre using a molten salt method[J].Carbon: An International Journal Sponsored by the American Carbon Society,2008(2):305-309.
[30] Dong Z J;Li X K;Yuan G M et al.Fabrication and oxidation resist-ance of titanium carbide-coated carbon fibers by reacting titanium hydride with carbon fibres in molten salts[J].THIN SOLID FILMS,2009,517(11):3248 -3252.
[31] Z.J. Dong;X.K. Li;G.M. Yuan;Z.W. Cui;Y. Cong;A. Westwood .Tensile strength, oxidation resistance and wettability of carbon fibers coated with a TiC layer using a molten salt method[J].Materials & design,2013(Sep.):156-164.
[32] X. Liu;S. Zhang .Low-Temperature Preparation of Titanium Carbide Coatings on Graphite Flakes from Molten Salts[J].Journal of the American Ceramic Society,2008(2):667-670.
[33] Ding J;Deng C J;Yuan W J et al.Novel synthesis and characteriza-tion of titanium carbide coatings on the graphite flakes[J].Adv Ma-ter Res,2013,634:3052 -3055.
[34] Ye J K;Thackray R P;Lee W E et al.Microstructure and rheological properties of titanium carbide-coated carbon black particles synthe-sized from molten salt[J].Journal of Materials Science,2013,48(18):6269 -6275.
[35] Z.J. Dong;X.K. Li;G.M. Yuan;Y. Cong;N. Li;Z.J. Hu;Z.Y. Jiang;A. Westwood .Fabrication Of Protective Tantalum Carbide Coatings On Carbon Fibers Using A Molten Salt Method[J].Applied Surface Science: A Journal Devoted to the Properties of Interfaces in Relation to the Synthesis and Behaviour of Materials,2008(18):5936-5940.
[36] Dong, Z.J.;Li, X.K.;Yuan, G.M.;Cui, Z.W.;Cong, Y.;Westwood, A..Synthesis in molten salts and formation reaction kinetics of tantalum carbide coatings on various carbon fibers[J].Surface & Coatings Technology,2012:169-179.
[37] Jun Ding;Chengji Deng;Wenjie Yuan .The synthesis of titanium nitride whiskers on the surface of graphite by molten salt media[J].CERAMICS INTERNATIONAL,2013(3):2995-3000.
[38] Mingtao Zheng;Yingliang Liu;Peng Wang;Yong Xiao .Synthesis and formation mechanism of cubic boron nitride nanorods in lithium bromide molten salt[J].Materials Letters,2013(Jan.15):206-208.
[39] Shaowei Zhang;Matthana Khangkhamano;Haijun Zhang .Novel Synthesis of ZrB_2 Powder Via Molten-Salt-Mediated Magnesiothermic Reduction[J].Journal of the American Ceramic Society,2014(6):1686-1688.
[40] 张海军;张少伟;李发亮 等.一种硼化锆-碳化硅复合粉体及其制备方法[P].中国,201310415283.1,2013 -09 -13.
[41] Ran S;Sun H F;Wei Y N et al.Low-temperature synthesis of nano-crystalline NbB2 powders by borothermal reduction in molten salt[J].Journal of the American Ceramic Society,2014,97(1):1 -4.
[42] 陈肇友.ZrB2质与TiB2质耐火材料[J].耐火材料,2000(04):224-229.
[43] 杜爽,曹迎楠,张海军,张少伟,张振聪.ZrB2-SiC复相陶瓷制备方法研究现状[J].耐火材料,2014(03):224-230.
[44] David Poriehault;Sarala Devi;Patricia Beaunier .A General Solution Route toward Metal Boride Nanocrystals[J].Angewandte Chemie,2011(14):3262-3265.
[45] Carenco, S.;Portehault, D.;Boissière, C.;Mézailles, N.;Sanchez, C. .Nanoscaled metal borides and phosphides: Recent developments and perspectives[J].Chemical Reviews,2013(10):7981-8065.
[46] William G. Fahrenholtz;Gregory E. Hilmas;Inna G. Talmy;James A. Zaykoski .Refractory Diborides of Zirconium and Hafnium[J].Journal of the American Ceramic Society,2007(5):1347-1364.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
作者相关
文章评分
  • 您的评分：
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%

版权所有©2010中国科学院金属研究所中国科技出版传媒股份有限公司

本系统由北京仁和汇智信息技术有限公司设计开发

技术支持：info@rhhz.net