欢迎登录材料期刊网

材料期刊网

高级检索

为了探究CaO-MgO-Al2O3三元富铝系统物相及显微结构的演变过程,以铝酸钙水泥、尖晶石细粉和氧化铝微粉为原料,分别按C2M2A14和CM2A8的理论化学组成配料,再分别经1 300、1 400、1 500、1 650、1 700和1 750℃保温6h热处理后,利用XRD、SEM及EDS研究刚玉-尖晶石浇注料基质高温处理过程中的物相组成及显微结构演变.结果表明:1 400℃处理后,基质中有片状晶体CA6(CaAl12O19)生成;处理温度升高至1 650℃,CA6与MA(MgAl2O4)反应生成C2M2A14(Ca2Mg2Al28O46);随着处理温度的升高,晶体的形貌逐渐由六方片状演变为等轴状.MgO与CaO物质的量比增大至2,处理温度升高至1 750℃后,样品中有等轴状晶体CM2A8(CaMg2Al16O27)生成,且同时存在C2M2A14.

参考文献

[1] 陈冲;陈海;王俊;孙宝德.六铝酸钙材料的合成、性能和应用[J].硅酸盐通报,2009(z1):201-205.
[2] 李有奇;李亚伟;金胜利;李楠.六铝酸钙材料的合成及其显微结构研究[J].耐火材料,2004(5):318-323.
[3] 罗琼;顾华志;李正坤;黄奥;张家勤.CA2-MA复相材料的合成与性能研究[J].硅酸盐通报,2012(6):1631-1635,1640.
[4] L. A. Diaz;R. Torrecillas.Hot bending strength and creep behaviour at 1000-1400 deg C of high alumina refractory castables with spinel, periclase and dolomite additions[J].Journal of the European Ceramic Society,20091(1):53-58.
[5] 李胜;李友胜;李鑫;柯昌明;李楠.利用提钛尾渣制备六铝酸钙-镁铝尖晶石多孔材料[J].耐火材料,2010(2):100-103.
[6] Eric Y. Sako;Mariana A. L. Braulio;Enno Zinngrebe.In-Depth Microstructural Evolution Analyses of Cement-Bonded Spinel Refractory Castables: Novel Insights Regarding Spinel and CA_6 Formation[J].Journal of the American Ceramic Society,20125(5):1732-1740.
[7] Antonio H. De Aza;Pilar Pena;Salvador De Aza.Ternary system Al{sub}2O{sub}3-MgO-CaO: I, primary phase field of crystallization of spinel in the subsystem MgAl{sub}2O{sub}4-CaAl{sub}4O{sub}7-CaO-MgO[J].Journal of the American Ceramic Society,19998(8):2193-2203.
[8] Antonio H. De Aza;Juan E. Iglesias;Pilar Pena;Salvador De Aza.Ternary system Al{sub}2O{sub}3-MgO-CaO: Part II, phase relationships in the subsystem Al{sub}2O{sub}3-MgAl{sub}2O{sub}4-CaAl{sub}4O{sub}7[J].Journal of the American Ceramic Society,20004(4):919-927.
[9] Cristina Dominguez;Jerome Chevalier;Ramon Torrecillas.Microstructure development in calcium hexaluminate[J].Journal of the European Ceramic Society,20013(3):381-387.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%