研究了Ni-P合金镀层在盐酸、硫酸、硝酸三种介质中的耐蚀性能.通过浸泡实验,得出不同磷含量饺层的腐蚀数据,同时还与纯镍镀层、1Cr-18Ni9Ti不锈钢进行了比较.对腐蚀后镀层表面钝化膜成分的AES分析表明,Ni-P合金镀层的耐蚀机理与表面磷化钝化膜的生成及溶解有关.
参考文献
[1] | Mai Q X;Daniels R D;harpalani H B .Structureal changes induced by heating in electroless nickel-phosphorus alloys[J].Thin Solid Films,1988,166:235-247. |
[2] | Lambert M R;Duquette D J .Astudy of electroless nickel coatings containing low phosphorus[J].Thin Solid Films,1989,177:207-223. |
[3] | Sugita K;Ueno N .Composition and crystallinity of electroless nickel[J].Journal of the Electrochemical Society,1984,131(01):111-114. |
[4] | Diegle R B;Clayton C R et al.An XPS Investigation in to the passivity of an amorphous Ni-P alloy[J].Journal of the Electrochemical Society,1988,135(05):1085. |
[5] | Riedel W .Chemical nickel plating against corrosion and wear[J].Galvan-Organo,1982,528:729. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%