欢迎登录材料期刊网

材料期刊网

高级检索

采用磁控反应溅射法制备了一系列不同Al含量的Cr1-xAlxN涂层,通过能谱仪(EDS)测试涂层的成分,X射线衍射仪(XRD)表征涂层的微结构,扫描电镜(SEM)观察涂层的表面形貌,研究了Al含量对涂层的微结构和高温抗氧化性能的影响.结果表明,涂层取CrN的面心立方结构生长,且呈(111)择优取向.随着Al含量增加,涂层的晶格常数减小,涂层的高温抗氧化性能显著提高.Cr0.6356Al0.3644N涂层随着氧化温度的升高,表面的Al含量略为上升,在900℃涂层产生裂纹失效.

参考文献

[1] Otani Y;Hofmann S .Arc evaporated Ti-N films with reduced macroparticle contamination[J].Thin Solid Films,1996,287(01):202-207.
[2] 李钦虎,王军.磁控反应溅射沉积CrN薄膜的抗氧化性研究[J].表面技术,2005(06):40-41,44.
[3] Lee SY;Kim SD;Hong YS .Application of the duplex TiN coatings to improve the tribological properties of Electro Hydrostatic Actuator pump parts[J].Surface & Coatings Technology,2005(1/3):266-271.
[4] Peter Panjan;Boris Navinsek;Miha Cekada .Oxidation behaviour of TiAlN coatings sputtered at low temperature[J].Vacuum,1999,53(01):127-131.
[5] 王永康,雷廷权,夏立芳,熊仁章.Ti0.5Al0.5N涂层的抗高温氧化行为[J].材料工程,2001(01):12-14.
[6] J. H. Hsieh;C. Liang;C. H. Yu;W. Wu .Deposition and characterization of TiAlN and multi-layered TiN/TiAlN coatings using unbalanced magnetron sputtering[J].Surface & Coatings Technology,1998(1/3):132-137.
[7] Günter B;Christoph F;Erhard B et al.Development of chromium nitride coatings substituting titanium nitride[J].Surface and Coatings Technology,1996,86-87(01):184-191.
[8] L. Cunha;M. Andritschky;K. Pischow;Z. Wang .Microstructure of CrN coatings produced by PVD techniques[J].Thin Solid Films: An International Journal on the Science and Technology of Thin and Thick Films,1999(0):465-471.
[9] Fan B W;Jeng J L;Jeng G D .Evaluation of the mechanical properties and tribological behayior of the CrN coating deposited on mild steel modified with electroless Ni interlayer[J].Thin Solid Films,2000,377-378(02):354-359.
[10] Mayrhofer P H;Willmann H;Mitterer C .Oxidation kinetics of sputtered Cr-N hard coatings[J].Surface and Coatings Technology,2001,146-147(01):222-228.
[11] 王永康,熊仁章,雷廷权,夏立芳,李炳生.Al含量对Ti1-XAlXN涂层组织结构的影响[J].材料工程,2002(08):24-25,12.
[12] Man BY;Guzman L;Miotello A;Adami M .Microstructure, oxidation and H-2-permeation resistance of TiAlN films deposited by DC magnetron sputtering technique[J].Surface & Coatings Technology,2004(0):9-14.
[13] 汪涛,鲁玉祥,祝美丽,张俊善.颗粒增强金属基原位复合材料的制备技术回顾与展望[J].宇航材料工艺,2000(01):12-18.
[14] 王守仁,张景春,王砚军.高温合金中Cr2O3氧化膜与AL2O3氧化膜的比较[J].山东建材,2002(01):35-36.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%