环氧树脂由于其本身的附着力强,耐化学药品性和耐磨性也很好,所以被广泛应用于防腐涂料上.但是由于其自身脆性等缺点,在使用中通常需要时其进行改性处理.其中,各种纳米粉体对环氧树脂的改性得到了广泛的关注,对于提高环氧涂料的耐腐蚀性和耐磨性等性能发挥了重要作用.主要综述了纳米粉体在提高环氧树脂涂料的防腐性和耐磨性等方面的研究进展,介绍了纳米粉体分散改性的先进方法和表征手段,对纳米填料应用于重防腐耐磨环氧涂料的发展进行了展望.
参考文献
| [1] | 宣兆龙,易建政,杜仕国.防腐涂料用环氧树脂的改性及添加剂[J].腐蚀科学与防护技术,2000(04):221-223. |
| [2] | 王训遒,李燕红,蒋登高,胡晓茹.纳米CaCO3在环氧树脂中的分散及其复合涂料的制备[J].化工新型材料,2005(06):66-68. |
| [3] | 李远利,雍歧卫,刘志.管道防腐涂层新发展[J].涂料工业,2007(02):55-57. |
| [4] | 张之圣,樊攀峰,李海燕.纳米SiO2/环氧树脂的制备与表征[J].材料工程,2004(10):50-53. |
| [5] | 李齐方,于运花,杨庆泉,马剑峰,金日光.聚氨酯/纳米复合涂料的红外特性及其力学性能的研究[J].高分子材料科学与工程,2002(03):110-113. |
| [6] | 环氧改性氟碳纳米复合船舶涂料的研制[J].兰州理工大学学报,2005(05):67-70. |
| [7] | 郑亚萍,宁荣昌.纳米SiO2环氧树脂复合材料性能研究[J].玻璃钢/复合材料,2001(02):34-36. |
| [8] | 高濂;孙静;刘阳桥.纳米粉体的分散及表面改性[M].北京:化学工业出版社,2003:144-204. |
| [9] | Sun Yangyang;Zhang Zhuqing;Wong C P .Study on mono-dispersed nano-size silica by surface modification for underlill applications[J].Journal of Colloid and Interface Science,2005,292:436-444. |
| [10] | 黄毅,彭兵,柴立元,程明明,苏维丰.聚合物分散剂对纳米TiO2水悬浮液分散稳定性的影响[J].中国粉体技术,2006(02):24-28. |
| [11] | 李亚萍,华勇,蒋登高,马生花,翟专科,邹厚锋,姚方明.碳化硅微粉的接枝聚合改性[J].金刚石与磨料磨具工程,2007(03):80-84. |
| [12] | 聂鹏,赵学增,陈芳,王伟杰.基于欠膨胀射流的SiO2/环氧树脂纳米复合材料制备方法研究[J].高校化学工程学报,2005(06):834-838. |
| [13] | 俞豪杰 .环氧树脂的无机纳米微粒改性、功能和应用研究[D].杭州:浙江大学,2006. |
| [14] | Zhang XZ;Wang FH;Du YL .Effect of nano-sized titanium powder addition on corrosion performance of epoxy coatings[J].Surface & Coatings Technology,2007(16/17):7241-7245. |
| [15] | Bagherzadeh MR;Mahdavi F .Preparation of epoxy-clay nanocomposite and investigation on its anti-corrosive behavior in epoxy coating[J].Progress in Organic Coatings: An International Review Journal,2007(2):117-120. |
| [16] | Chang L;Zhang z;Breidt C et al.Tribological properties of epoxy nanocomposites I.Enhancement of the wear resistance by nano-TiO2 particles[J].Wear,2005,258:141-148. |
| [17] | Bernd Wetzel;Frank Haupert;Ming Qiu Zhang .Epoxy nanocomposites with high mechanical and tribological performance[J].Composites science and technology,2003(14):2055-2067. |
| [18] | 纪秋龙,章明秋,容敏智,WETZEL B,FRIEDRICH K.纳米碳化硅填充环氧树脂复合材料的摩擦磨损特性[J].复合材料学报,2004(06):14-20. |
| [19] | Ming Qiu Zhang;Min Zhi Rong;Shu Li Yu;Bernd Wetzel;Klaus Friedrich .Improvement of Tribological performance of Epoxy by the Addition of Irradiation Grafted Nano-Inorganic Particles[J].Macromolecular materials and engineering,2002(2):111-115. |
| [20] | Kin-Tak Lau;David Hui .Effectiveness of using carbon nanotubes as nano-reinforcements for advanced composite structures[J].Carbon: An International Journal Sponsored by the American Carbon Society,2002(9):1605-1606. |
| [21] | Anwar Agtan;Aldinton Allie;Adriane Ludwick et al.Formulation and evaluation of nano-structurad polymeric coatings for corrosion protection[J].Surface and Coatings Technology,2007,202(02):370-378. |
| [22] | Kim JA;Seong DG;Kang TJ;Youn JR .Effects of surface modification on rheological and mechanical properties of CNT/epoxy composites[J].Carbon: An International Journal Sponsored by the American Carbon Society,2006(10):1898-1905. |
| [23] | Chen HY;Jacobs O;Wu W;Rudiger G;Schadel B .Effect of dispersion method on tribological properties of carbon nanotube reinforced epoxy resin composites[J].Polymer Testing,2007(3):351-360. |
| [24] | 胡高平;肖卫东.酚醛胺与低分子聚酰胺协同对环氧树脂固化的研究[J].化学与黏合,2000(04):163-165. |
| [25] | 邱华,张宗明,冉洪武,魏文政,谢春色.正交试验方法在防腐涂料研究中的应用[J].表面技术,2006(06):67-68,81. |
| [26] | 吴跃焕,杨卓如.重防腐涂料用环氧树脂的改性特点[J].化学建材,2002(03):8-12. |
| [27] | 郭清泉,陈焕钦.重防腐涂料的发展展望[J].化工进展,2003(09):947-950. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%