以微弧氧化技术在航空领域的应用为目标,选择常用的航空铝合金LD7,采用单因素实验研究了微弧氧化过程中电压、电流密度、频率、占空比等电参数对微弧氧化膜厚度和平均成膜速率的影响,得出了LD7铝合金在硅-磷复合电解液体系中进行微弧氧化的最佳工艺电参数.通过扫描电镜和X射线衍射谱对膜层的形貌和相结构进行了研究,结果表明:氧化时间增加形成的膜层孔径增大,孔分布的不均匀性增加;膜层主要由α-Al2O 3和γ-Al2 O3组成.
参考文献
[1] | A. L. Yerokhin;X. Nie;A. Leyland;A. Matthews;S. J. Dowey .Plasma electrolysis for surface engineering[J].Surface & Coatings Technology,1999(2/3):73-93. |
[2] | H. X. Li;V. S. Rudnev;X. H. Zheng .Characterization of Al_2O_3 ceramic coatings on 6063 aluminum alloy prepared in borate electrolytes by micro-arc oxidation[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2008(1/2):99-102. |
[3] | Arslan, E;Totik, Y;Demirci, EE;Vangolu, Y;Alsaran, A;Efeoglu, I .High temperature wear behavior of aluminum oxide layers produced by AC micro arc oxidation[J].Surface & Coatings Technology,2009(6/7):829-833. |
[4] | 张文华,胡正前,马晋.俄罗斯微弧氧化技术研究进展[J].轻合金加工技术,2004(01):25-29. |
[5] | 徐晋勇,王斌,高原.铝及铝合金等离子体微弧氧化技术的研究[J].机械,2006(09):1-4. |
[6] | 张勇,张虹,陈跃良.微弧氧化技术在航空领域的应用前景及存在的问题[J].材料保护,2008(09):43-45. |
[7] | 李颂,刘耀辉,庞磊.电源频率对铸铝合金微弧氧化陶瓷层的影响[J].材料科学与工艺,2008(02):287-289. |
[8] | 罗胜联,周海晖,陈金华,旷亚非.ZL系列铸铝合金的微弧氧化[J].中国有色金属学报,2002(03):491-495. |
[9] | 佟晓静.铝铜合金硬质阳极氧化工艺技术[J].机械,2008(05):68-70. |
[10] | 姜兆华,辛世刚,王福平,吴晓宏,清水纪夫.铝合金在水玻璃-KOH-NaAlO2体系中的微等离子体氧化[J].中国有色金属学报,2000(04):519. |
[11] | Xin SG;Song LX;Zhao RG;Hu XF .Influence of cathodic current on composition, structure and properties of Al2O3 coatings on aluminum alloy prepared by micro-arc oxidation process[J].Thin Solid Films: An International Journal on the Science and Technology of Thin and Thick Films,2006(1):326-332. |
[12] | Samir H. Awad;H. C. Qian .Deposition of duplex Al{sub}2O{sub}3/TiN coatings on aluminum alloys for tribological applications using a combined microplasma oxidation (MPO) and arc ion plating (AIP)[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2006(1/2):215-222. |
[13] | XIN Shi-gang;SONG Li-xin;ZHAO Rong-gen et al.Propertied of Aluminum Oxide Coating in Aluminum Alloy Produced by Micro-arc Oxidation[J].Surface and Coatings Technology,2005,199:184-188. |
[14] | Hong-yan Ding;Zhen-dong Dai;Suresh C. Skuiry;David Hui .Corrosion wear behaviors of micro-arc oxidation coating of Al_2O_3 on 2024Al in different aqueous environments at fretting contact[J].Tribology International,2010(5/6):868-875. |
[15] | K. Prasad Rao;G.D. Janaki Ram;B.E. Stucker .Improvement in corrosion resistance of friction stir welded aluminum alloys with micro arc oxidation coatings[J].Scripta materialia,2008(11):998-1001. |
[16] | 胡德林.金属学及热处理[M].西安:西北工业大学出版社,1995 |
[17] | 蒋百灵,白力静,蒋永锋.LY12铝合金表面氧化铝陶瓷层的生长过程[J].中国有色金属学报,2001(z2):186-189. |
[18] | NIE X;LEYLAND A;SONG H W.Thickness Effects on the Mechanical Properties of Micro-arc Discharge Oxide Coatings on Aluminum Alloys[J].Surface and Coatings Technology,1999(116/119):1055-1060. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%