欢迎登录材料期刊网

材料期刊网

高级检索

采用正交实验法设计多种氨丙基甲基二乙氧基硅烷的水解工艺条件,在冷轧钢表面制备硅烷膜,通过对比每种条件所得硅烷膜样品在3.50%NaCl溶液中的塔菲尔极化曲线,获得了最佳水解工艺,并用稳态极化曲线和扫描电子显微镜,研究了该工艺制备的硅烷膜对冷轧钢耐蚀性能的影响.研究表明:硅烷、乙醇、去离子水的体积比2:10:88,水解温度40.0℃,溶液pH=13.0为最佳水解工艺条件;在该条件下形成的硅烷膜可大幅度提高冷轧钢在3.50%NaCl溶液中的耐蚀性能.

参考文献

[1] 陈锦虹,卢锦堂,许乔瑜,孔纲.镀锌层上有机物无铬钝化涂层的耐蚀性[J].材料保护,2002(08):29-31.
[2] 郝建军,牟世辉,安成强,刘常升,韩恩厚.镀锌层无铬钝化研究进展[J].材料导报,2003(09):19-20,24.
[3] 于元春,李宁,胡会利,张景双,屠振密.无铬钝化与三价铬钝化的研究进展[J].表面技术,2005(05):6-9.
[4] 邹锦光,刘建平,曾振欧,赵国鹏.镀锌层的三价铬钝化[J].电镀与涂饰,2005(08):46-48.
[5] M. F. Montemor;M. G. S. Ferreira .Electrochemical study of modified bis-[triethoxysilylpropyl] tetrasulfide silane films applied on the AZ31 Mg alloy[J].Electrochimica Acta,2007(27):7486-7495.
[6] Bexell U;Grehk TM .A corrosion study of hot-dip galvanized steel sheet pre-treated with gamma-mereaptopropyltrimethoxysilane[J].Surface & Coatings Technology,2007(26):4734-4742.
[7] M. F. Montemor;R. Pinto;M. G. S. Ferreira .Chemical composition and corrosion protection of silane films modified with CeO{sub}2 nanoparticles[J].Electrochimica Acta,2009(22):5179-5189.
[8] Fedel, M.;Druart, M.-E.;Olivier, M.;Poelman, M.;Deflorian, F.;Rossi, S. .Compatibility between cataphoretic electro-coating and silane surface layer for the corrosion protection of galvanized steel[J].Progress in Organic Coatings: An International Review Journal,2010(2):118-125.
[9] A. Scott;J.E. Gray-Munro .The surface chemistry of 3-mercaptopropyltrimethoxysilane films deposited on magnesium alloy AZ91[J].Thin Solid Films: An International Journal on the Science and Technology of Thin and Thick Films,2009(24):6809-6816.
[10] Montemor MF;Ferreira MGS .Analytical characterization of silane films modified with cerium activated nanoparticles and its relation with the corrosion protection of galvanised steel substrates[J].Progress in Organic Coatings: An International Review Journal,2008(3):330-337.
[11] M. F. Montemor;W. Trabelsi;S. V. Lamaka;K. A. Yasakau;M. L. Zheludkevich;A. C. Bastos;M. G. S. Ferreira .The synergistic combination of bis-silane and CeO{sub}2·ZrO{sub}2 nanoparticles on the electrochemical behaviour of galvanised steel in NaCl solutions[J].Electrochimica Acta,2008(20):5913-5922.
[12] 肖围,满瑞林,彭天兰,徐斌,冯永强.铝管表面硅烷稀土复合膜的制备及性能研究[J].稀有金属,2010(02):191-196.
[13] 吴海江,杨飞英.热镀锌钢表面硅烷膜的腐蚀电化学性能[J].中国表面工程,2009(05):66-69.
[14] 龚健民,鲁道荣.冷轧钢表面硅烷膜的制备及耐蚀性能研究[J].合肥工业大学学报(自然科学版),2010(01):126-128,132.
[15] 龚健民,鲁道荣.正交试验法研究冷轧钢表面硅烷膜的制备工艺及耐蚀性能[J].腐蚀与防护,2010(01):47-50.
[16] 牛运峰;鲁道荣 .冷轧钢表面硅烷复合膜的制备及耐蚀性能[J].化工学报,2010,61(z1):72-76.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%