采用高频感应熔覆技术在低碳钢表面熔覆了一层铁基耐磨涂层,利用金相显微镜和扫描电子显微镜对熔覆涂层的微观组织形貌进行了分析.结果表明:采用高频感应熔覆技术能制得冶金结合性能良好的铁基涂层,熔覆涂层的组织由大量的γ-(Cr-Ni-Fe-C)合金固溶体相和CrB,Cr2B,Cr23 C6,Cr7 C3,Fe3C等硼化物、碳化物等析出强化相组成,熔覆涂层具有很高的硬度值,最大值达到850HV0.2.
参考文献
| [1] | 董允;张庭森;林晓娉.现代表面技术[M].北京:机械工业出版社,2003 |
| [2] | Study on modes of energy action in laser-induction hybrid cladding[J].Applied Surface Science: A Journal Devoted to the Properties of Interfaces in Relation to the Synthesis and Behaviour of Materials,2009(3):749. |
| [3] | 张增志.高效快速感应熔涂技术[M].北京:冶金工业出版社,2001 |
| [4] | Han-Young Lee;Akira Ikenaga;Sung-Hoon Kim .The effects of induction heating rate on properties of Ni-Al based intermetallic compound layer coated on ductile cast iron by combustion synthesis[J].Intermetallics,2007(8):1050-1056. |
| [5] | 朱文东,刘仁培,潘攀.硼对铁基合金粉块碳弧堆焊层成形性和耐磨性的影响[J].机械工程材料,2010(03):57-60. |
| [6] | 杨效田,王智平,李文生,路阳,李霞,丁明辉,周晶晶.感应熔覆制备表面涂层工艺及涂层组织特征[J].材料保护,2010(08):46-50. |
| [7] | 张增志,牛俊杰,付跃文.感应熔覆镍基合金粉末涂层工艺和性能研究[J].材料热处理学报,2004(02):31-34. |
| [8] | 单际国,丁建春,任家烈.铁基自熔合金光束熔覆层的微观组织及强化机理[J].焊接学报,2001(04):1-4. |
| [9] | KIM Hyung-jun;YOON Byoung-hyun;LEE Chang-hee.Wear Performance of the Fe-based Alloy Coatings Produced by Plasma Transferred Arc Weld-surfacing Process[J].WEAR,2002(249):846-852. |
| [10] | 李胜,曾晓雁,胡乾午.合金元素及其含量对铁基合金激光熔覆层性能的影响[J].热加工工艺,2006(23):67-69. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%