给出了不需用PdCl2活化,采用连续化方式在球形Ni(OH)2表面化学镀钴和钴锌合金的工艺条件.研究了镀液pH值、钴盐浓度和化学镀的反应温度对产物的堆积密度以及结构的影响.结果表明,析氢反应随着整个化学镀过程,有利于生成多孔化学镀层,并能够有效地提高材料的电化学性能.
参考文献
[1] | Oliva P;Leonaarde J;Laurent J.Review of the structure and the electrochemistry of nickel hydroxides and oxyhydroxides[J].Journal of Power Sources,1982(08):229-255. |
[2] | Armstrong R.D.Some effets of cobalt hydroxides upon electrochemical behaviour of nickel hydroxide electrode[J].Journal of Power Sources,1989(25):89-97. |
[3] | Armstrong R.D .Some effets of the addition of cobalt to the nickel hydroxide electrode[J].Journal of Applied Electrochemistry,1988(18):215-219. |
[4] | Sood A.K.Studies on the effect of cobalt addition to the nickel hydroxide electrode[J].Journal of Applied Electrochemistry,1986(16):274-280. |
[5] | Ding yunchang.Effects of surface modification of Ni(OH)2 powders on the performance of nickel cathodes[J].Journal of Power Sources,1997(66):55-59. |
[6] | 刘建华,李新海,郭炳昆.球形氢氧化亚镍的制备[J].湘潭矿业学院学报,1997(01):57-62. |
[7] | 王先友 .球形Ni(OH)2表面包覆钴的正交试验研究[J].电源技术,1999,23(02):118. |
[8] | Xianyou Want.Surface modification and electrochemical studies of spherical nickel hydroxide[J].Journal of Power Sources,1998(72):221-225. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%