介绍了钯及其合金的应用、电沉积和与金沉积层的性能比较.概述了本科研组在Pd、Pd-Ni、Pd-Co和Pd-Fe合金电沉积的主要研究结果,包括镀液组成、沉积条件、电沉积、电结晶和镀层性能.
参考文献
[1] | Ronald J Morrissey .Rhodium plating[J].Plating and Surface Finishing,1995,82(08):69. |
[2] | Joseph A Abys .Palladium Plating[J].Plating and Surface Finishing,1995,82(08):67-68. |
[3] | LE Penven R;Levason W;Platcher D .Sutdies of palladium electrodeposition from baths based on Pd(NH3)2X2 salts. PartⅠ[J].Journal of Applied Electrochemistry,1992,20(03):399-404. |
[4] | LE Penven R;Levason W;Platcher D .Sutdies of palladium electrodeposition from baths based on Pd(NH3)2X2. Part Ⅱ: X=Br and X=NO2[J].Journal of Applied Electrochemistry,1992,22(05):421-424. |
[5] | Jayakrishnan S;Natarajan R S .Hydrogen codeposition in palladium plating[J].Metal Finishing,1991,89(01):23-25. |
[6] | Lai C K;Wang Y Y;Wan C C .Palladium electrodeposition from ammonia-free electrolyte[J].Journal of Electroanalytical Chemistry,1992,322(1-2):267-278. |
[7] | Su Il Pyun;Chan Lim .A study on the electrodepostion mechanism of palladium from ammoniacal solution using a rotating Pt ring Cu disk electrode[J].Transactions of the Institute of Metal Finishing,1993,71(04):156-160. |
[8] | Straschil H K;Abys J A;Kudrak E J et al.New palladium strike improves adhension and porosity[J].Metal Finishing,1992,90(01):42-47. |
[9] | Kudrak E J;Abbys J A;Chinchankar V et al.Porosity of composite palladium,palladium-nickel and gold electrodeposits[J].Plating and Surface Finishing,1992,79(02):49-55. |
[10] | Enyo M;Biswas P C .Hydrogen absorption in palladium electrodes in alkaline solution[J].Journal of Electroanalytical Chemistry,1992,335:309-319. |
[11] | Grimm R D;Landolt D .Investigation of the influence of pulse parameters on crack formation in palladium electrodeposits[J].Surface and Coatings Technology,1987,31(02):151-161. |
[12] | Martin J L;Toben M P .Palladium and palladium alloy electrodeposits in the electronics industry[J].Metal Finishing,1990,88(01):39-44. |
[13] | Graham A H;Pike-Biegunski M J;Updegraff S W .Evaluation of palladium substitutes for gold[J].Plating and Surface Finishing,1983,70(11):52-57. |
[14] | FUKUMOTO Y;Kawashima Y;Handa K et al.Pulse current electrodeposition of palladium[J].Metal Finishing,1984,82(09):77-80. |
[15] | Martin J L;McCaskie J E;Toben M P .Palladium plating[P].US:4622110,1986. |
[16] | Fred I Novel;James L Martin;Michael P Toben .Alkaline baths and methods for electrodeposition of palladium and palladium alloys[P].EuropeanPatentApplication0225422,1986. |
[17] | Fred I Novel;Sands Point;James L Martin et al.Alkaline baths and methods for electrodeposition of palladium and palladium alloys[P].US 4741818,1988. |
[18] | Penven R LE;Levason W;Whitfield T A .Active metal deposition-dissolution reactions:A further investigation of Pd[J].Electrochimica Acta,1982,27(07):897-902. |
[19] | Manolatos P;Jerome M .A thin palladium coating on iron for hydrogen permeation studies[J].Electrochimica Acta,1996,41(03):359-365. |
[20] | Kandasamy K;Lewis F A;MeKEE S G .Hydrogen chemical potentials and phase transitions in palladium black electrodepostis[J].Surface and Coatings Technology,1988(35):93-99. |
[21] | Baket R G;CEF Duva R .Electrodeposition and market effects of palladium and its alloys[J].Plating and Surface Finishing,1986,73(06):40-43. |
[22] | Franz Simon;Wolfgang Zilske .A sulfuric acid bath for electroplating palladium[J].Plating and Surface Finishing,1982,69(06):86-89. |
[23] | Blair A;Karustis G;Wilcox J .A new pure palladium electrodeposit for electronic applications[J].Transactions of the Institute of Metal Finishing,1989,67(01):10-12. |
[24] | J. -D. Kim;Y. -H. Baek;W. -S. Choi;K. -S. Bok .Iron-42 wt pct nickel lead frame with palladium electroplated multi-layer for semiconductor packages[J].Plating & Surface Finishing,1999(6):113-116. |
[25] | Crosby J N;Harrison J A;Whitfield T A .Active metal deposition-dissolution reactions:a further investigation of Pd[J].Electrochimica Acta,1982,27(07):897-902. |
[26] | Crosby J N;Harrison J A;Whitfield T A .An investigation of the palladium deposition-dissolution reaction and complexing in electrode kinetics[J].Electrochimica Acta,1981,26(11):1647-1651. |
[27] | Sobha Jayakrishnan;Natarajan S R .Electrodeposition of palladium from ammine complexes[J].Metal Finishing,1988,86(02):81-82. |
[28] | Joseph A. Abys .Palladium plating[J].Plating & Surface Finishing,1999(11):57-58. |
[29] | Harrison J A;Hill R P J;Thompson J .Kinetics of the electrodeposition of palladium[J].Journal of Electroanalytical Chemistry and Interfacial Electrochemistry,1973,47(03):431-440. |
[30] | Bell M F;Harrison J A .The depostion of palladium[J].Journal of Electroanalytical Chemistry and Interfacial Electrochemistry,1973,41(01):15-25. |
[31] | 杨防祖.纯钯电沉积及其成核机理研究[J].电化学,1997(01):103. |
[32] | 杨防祖;许书楷;姚士冰 等.柠檬酸钾镀钯新工艺[J].电镀与环保,1997,17(02):3-5. |
[33] | 杨防祖;许书楷;李振良 等.添加剂对钯电沉积层氢含量和内应力的影响[J].电镀与涂饰,1998,17(01):7-10. |
[34] | Fang-Zu Yang;Shu-kai Xu;Ling Huang;Xue-Ying Zhang;Shao-min Zhou .A study on the effect of bath composition on the internal stress of a palladium electrodeposit[J].Transactions of the Institute of Metal Finishing,1998(6):238-240. |
[35] | Fang-zu Yang;Shu-Kai Xu .Study on some properties of the electrolyte solution in the electrodeposition of palladium[J].Transactions of the Institute of Metal Finishing,1999(5):103-105. |
[36] | 蔡积庆 .钯和钯合金电镀工艺[J].表面技术,1994,23(04):174-175. |
[37] | J. -D. Kim;Y. -H. Baek;W. -S. Choi;K. -S. Bok .Iron-42 wt pct nickel lead frame with palladium electroplated multi-layer for semiconductor packages[J].Plating & Surface Finishing,1999(6):113-116. |
[38] | 张宣东.优良的代金镀层--钯镍合金镀层[J].电镀与精饰,1993(05):19. |
[39] | Abys J A;Straschil H K;Kadija I et al.The electrodeposition and material properties of palladium-nickel alloys[J].Metal Finishing,1991,89(07):43-52. |
[40] | 李凤凌;姚士冰;周绍民 .钯镍合金电镀研究的进展[J].电镀与环保,1997,17(05):5. |
[41] | 李凤凌,杨防祖,李振良,佘沛亮,姚士冰,周绍民.钯镍合金电沉积层的XRD研究[J].材料保护,1999(03):4-5. |
[42] | 李凤凌;姚士冰;周绍民 .高镍Pd-Ni合金组成与性能研究[J].电镀与环保,1999,19(01):10-12. |
[43] | 李凤凌;姚士冰;周绍民 .钯镍合金电镀研究的进展[J].电镀与环保,1997,17(05):5. |
[44] | 李凤凌 .钯镍合金电沉积的研究[D].厦门大学,1998. |
[45] | Kudrak E J;Abys J A;Humiec F .The impact of substrate roughness on porosity:a comparison of electroplated palladium,palladium-nickel & cobalt hard gold[J].Plating and Surface Finishing,1997,84(01):32-37. |
[46] | Abys J A;Breck G F;Straschil H K et al.The electrodeposition & materials properties of palladium-cobalt[J].Plating and Surface Finishing,1999,86(01):108-115. |
[47] | Abys J A;Kudrak E J;Fan C .The materials propeties and contact reliability of palladium-cobalt[J].Transactions of the Institute of Metal Finishing,1999,77(04):164-168. |
[48] | Abys J A;Kudrak E J;Fan C et al.Palladium-cobalt makes a superior finish[J].Connector specifier,1999,15(02):12-14. |
[49] | 吴永炘,文效忠,杨志雄,萧祖隆,李志勇.镍、钴、钯镀层的防铜渗性能比较[J].电镀与涂饰,2000(04):4-7. |
[50] | 吴永火斤;文效忠;杨志雄 等.镀层中基体金属扩散系数的测定[J].电镀与涂饰,1999,18(04):29-31. |
[51] | 佘沛亮 .钯铁、钯铂合金电沉积及沉积层结构与性能研究[D].厦门大学,1999. |
[52] | Kenneth J. Bryden;Jackie Y. Ying .Pulsed electrodeposition synthesis and hydrogen absorption properties of nanostructured palladium-iron alloy films[J].Journal of the Electrochemical Society,1998(10):3339-3346. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%