欢迎登录材料期刊网

材料期刊网

中国科学院金属研究所 科学出版社
高级检索
  1. 首页
  2. 期刊
  3. 电镀与精饰
  4. 钛合金表面处理技术的研究进展

电镀与精饰 , 2010, 32(10): 15-20. doi: 10.3969/j.issn.1001-3849.2010.10.005

钛合金表面处理技术的研究进展

姜海涛 1, , 邵忠财 2, , 魏守强 3,

1.沈阳理工大学,环境与化学工程学院,辽宁,沈阳,110159

2.沈阳理工大学,环境与化学工程学院,辽宁,沈阳,110159

3.沈阳理工大学,环境与化学工程学院,辽宁,沈阳,110159

基金项目:   辽宁省教育厅科研计划项目(2008615)  

关键词： 钛合金 , 表面处理 , 研究进展

Research Progress of Surface Treatment Techniques for Titanium Alloys

综述了钛合金表面处理的各种方法,如电镀、化学镀、热扩散、微弧氧化、等离子喷涂、离子注入、气相沉积法、激光表面合金化和激光熔覆、双层辉光离子渗镀和加弧辉光离子渗镀、纳米化技术、液相沉积、离子轰击等.同时又讨论了钛合金各种表面处理技术的特性和适应性,并指出了进一步的研究方向.

参考文献

[1] Boyer R R .An overview on the use of titanium in the aerospace industry[J].Materials Science and Engineering A,2006,213:103-114.
[2] 李梁,孙健科,孟祥军.钛合金的应用现状及发展前景[J].钛工业进展,2004(05):19-24.
[3] Elias C N .Biomedical application of titanium and its alloys[J].Biological Materials Science,2008,7(03):46-49.
[4] 胡树兵,李志章,梅志.物理气相沉积TiN复合涂层研究进展[J].材料科学与工程,2000(02):110.
[5] 何文芳 .钛合金上电镀[J].电镀与环保,1999,6(19):18-19.
[6] 刘毅,王会江,范晓龙,秦瑜洁.钛合金的表面处理及故障分析[J].电镀与精饰,2009(12):26-27,32.
[7] Turner W;Linszen D;Remington G .Electroplating of titanium and titanium base alloys[J].Materials Science and Engineering,1998,4(01):416-419.
[8] 张轲,刘道新.钛合金湿法镀前活化预处理工艺的研究[J].材料保护,2001(10):42-43.
[9] Brunelli K;Dabalà M;Dughiero F .Diffusion treatment of Ni-B coatings by induction heating to harden the surface of Ti-6Al-4V alloy[J].Materials Chemistry and Physics,2009,115(01):467-472.
[10] 范洪富,YAN Hong-juan,张翼,刘振雷,WANG Lei.热处理对钛基化学镀Ni-P镀层性能的影响[J].材料热处理学报,2008(04):153-156.
[11] 何利舰,张小农.钛及钛合金的表面处理技术新进展[J].上海金属,2005(03):39-45.
[12] Bell T;Dond H.Surface engineering of titanium the metal for the 21st century[A].Australia Melbourne,2000:1-10.
[13] Hasan G .Effect of thermal oxidation on corrosion and corrosion-wear behavior of Ti-6Al-4V alloys[J].BIOMATERIALS,2004,25:3325-3333.
[14] Chen, HT;Hsiao, CH;Long, HY;Chung, CJ;Tang, CH;Chen, KC;He, JL .Micro-arc oxidation of beta-titanium alloy: Structural characterization and osteoblast compatibility[J].Surface & Coatings Technology,2009(6/7):1126-1131.
[15] 薛文斌,邓志威,李永良,陈如意,张通和.Ti-6Al-4V在NaAlO2溶液中微弧氧化陶瓷膜的组织结构研究[J].材料科学与工艺,2000(03):41-45.
[16] Wang Y;Jiang B;Lei T et al.Dependence of growth features of microarc oxidation coatings of titanium alloys on control modes of alternate pulse[J].Materials Letters,2004,58:1907-1911.
[17] Lidong Zhao;Erich Lugscheider .Reactive plasma spraying of TiAl6V4 alloy[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2002(11/12):1214-1218.
[18] 尹钟大,向兴华,朱景川,来忠红.钛合金表面等离子喷涂制备ZrO2-Ti系功能梯度涂层[J].中国有色金属学报,1996(03):63-66.
[19] Khor KA;Gu YW;Pan D;Cheang P .Microstructure and mechanical properties of plasma sprayed HA/YSZ/Ti-6Al-4V composite coatings.[J].Biomaterials,2004(18):4009-4017.
[20] 胡正琼.钛合金的离子束改性[J].北京航空航天大学学报,1998(05):596.
[21] Xia L;Csik A;Langer G A.Structure and frictional characteristics of Ti-6Al-4V plasma based ion implantation with nitrogen then acetylene[J].Wear,1999:225-229,835-842.
[22] Rinner M;Gerlach J;Ensinger W .Formation of titanium oxide films on titanium and Ti6Al4V by O2-plasma immersion ion implantation[J].Surface and Coatings Technology,2000,132(2-3):111-116.
[23] 郝建军,黄继华,周志军,卜志国,赵建国.钛合金表面反应电火花沉积Ti（CN）涂层研究[J].材料热处理学报,2008(02):128-130.
[24] Kin D H;Lee B .Characterization of diamond-like carbon films deposited on commercially pure Ti and Ti-6Al-4V alloys[J].Materials Science and Engineering,2002,C22:914.
[25] 刘道新,唐宾,陈华,何家文.钛合金表面离子束增强沉积MoS2基膜层及其性能[J].中国有色金属学报,2001(03):454-460.
[26] Tian YS;Chen CZ;Wang DY;Huo QH;Lei TQ .Laser surface alloying of pure titanium with TiN-B-Si-Ni mixed powders[J].Applied Surface Science: A Journal Devoted to the Properties of Interfaces in Relation to the Synthesis and Behaviour of Materials,2005(1/4):223-227.
[27] Blanco-Pinzon C;Liu Z;Voisey K .Excimer laser surface alloying of titanium with nickel and palladium for increased corrosion resistance[J].Corrosion Science,2005,47(05):1251-1269.
[28] Yuling Yang;Duo Zhang;Wei Yan;Yiran Zheng .Microstructure and wear properties of TiCN/Ti coatings on titanium alloy by laser cladding[J].Optics and Lasers in Engineering,2010(1):119.
[29] 张松;张春华;康煜平 等.钛合金表面激光熔覆原位生成TiC增强符合涂层[J].中国有色金属学报,2007,11(06):1026-1030.
[30] 张高会,张平则,潘俊德,徐重.钛合金双层辉光无氢渗碳[J].有色金属,2004(01):4-6.
[31] Lin Qin;Linhai Tian;Ailan Fan;Bin Tang;Zhong Xu .Fatigue behavior of surface modified Ti-6Al-4V alloy by double glow discharge plasma alloying[J].Surface & Coatings Technology,2007(9/11):5282-5285.
[32] 陈飞,周海,张跃飞,潘俊德.钛合金表面加弧辉光离子无氢渗碳耐蚀性能的研究[J].表面技术,2003(04):53-56.
[33] Xi Y;Lu J;Wang Z .Effect of nanocrystallization on hot corrosion resistance of Ti-48Al-2Ag alloys in molten salts[J].Nonferrous Met Sol China,2006,16:511-516.
[34] Xi Y;Wang F;He L .Oxidation and hot-corrosion behavior of sputtered Ti-48Al-2Ag nanocrystalline coating[J].Materials Science Forum,2004,461:1181-1187.
[35] 张聪慧,刘研蕊,兰新哲.钛合金表面高能喷丸纳米化后的组织与性能[J].热加工工艺,2006(02):5-7.
[36] 高家诚,王勇,张春艳,李龙川.TC4表面液相沉积生物陶瓷涂层的研究[J].功能材料,2002(04):456-458.
[37] 唐光昕,朱张校,丁莲珍,沈万慈.离子轰击处理的TC11钛合金表面组织与性能[J].清华大学学报(自然科学版),2002(04):491-493.
[38] 刘道新,陈华,何家文.等离子渗氮与喷丸强化复合改进钛合金抗微动损伤性能[J].材料热处理学报,2001(03):49-54.
[39] 关春红,唐兆麟,王福会,吴维(山文),李世琼.搪瓷涂层对Ti-24Al-14Nb-3V抗氧化及热腐蚀性能的影响[J].材料研究学报,2000(z1):75-80.
[40] 王连军,孟长功,刘长厚,刘新.玻璃-陶瓷保护涂层对钛合金表面润湿性的研究[J].材料保护,2002(03):37-38.
[41] Yu X;Cao C;Yao Z .Corrosion behavior of rare metal (REM) conversion coatings on aluminum alloys LY12[J].Materials Science and Engineering,2000,A284:56-63.
[42] Yang X;Wang G;Dong G et al.Rare earth conversion coating on Mg-8.5Li alloy[J].Journal of Alloys and Compounds,2009,487:64-68.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
作者相关
文章评分
  • 您的评分：
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%

版权所有©2010中国科学院金属研究所中国科技出版传媒股份有限公司

本系统由北京仁和汇智信息技术有限公司设计开发

技术支持：info@rhhz.net