聚碳酸酯表面金属化处理后广泛应用于生产、生活的各个领域.利用环境友好的二氧化锰-硫酸微蚀体系,研究了溶胀处理过程中,溶胀液组成、溶胀条件及微蚀时间对聚碳酸酯表面粗化效果的影响.利用扫描电镜对其溶胀效果进行评价,从而得到理想的聚碳酸酯表面粗化溶胀效果.
参考文献
[1] | Ra S;Lee C;Cho J et al.Micro Via and Line Patterning for PCB Using Imprint technique[J].Current Applied Physics,2008,8(06):675-678. |
[2] | Ranby B .Surface Modification and Lamination of Polymers by Photo-Graftin[J].International Journal of Adhesion and Adhesives,1999,19(05):337-343. |
[3] | Latella BA;Triani G;Zhang Z;Short KT;Bartlett JR;Ignat M .Enhanced adhesion of atomic layer deposited titania on polycarbonate substrates[J].Thin Solid Films: An International Journal on the Science and Technology of Thin and Thick Films,2007(5):3138-3145. |
[4] | Ong H C;Chang R P H;Baker N et al.Improvement of Mechanical Properties of Amorphous Carbon Films Deposited on Polycarbonate Plastics[J].Surface and Coatings Technology,1997,89(01):38-46. |
[5] | Lee CC.;Jaing CC.;Hsu JC. .OPTICAL COATINGS ON POLYMETHYL METHACRYLATE AND POLYCARBONATE[J].Thin Solid Films: An International Journal on the Science and Technology of Thin and Thick Films,1997(1/2):122-124. |
[6] | 刘裕明,陈慧英,夏建新.低温等离子体对棉纺织物表面改性及时效研究[J].应用基础与工程科学学报,2004(02):127-131. |
[7] | 王艳芝.聚碳酸酯酸性化学镀Ni-Fe-P工艺[J].电镀与环保,2003(06):23-24. |
[8] | 王增林;李志新 .无铬污染的ABS工程塑料零部件表面粗化方法[P].中国专利:ZL200810017601.8,2008-03-05. |
[9] | Zhixin Li;Na Li;Lie Yin .An Environment-Friendly Surface Pretreatment of ABS Resin Prior to Electroless Plating[J].Electrochemical and solid-state letters,2009(12):D92-D95. |
[10] | Zhifeng Yang;Yue He;Zhun Li .Adhesion Improvement of ABS Resin to Electroless Copper by H2SO4-MnO2 Colloid with Ultrasound-Assisted Treatment[J].Journal of Adhesion Science and Technology: The International Journal of Theoredtical and Basic Aspects of Adhesion Science and Its Applications in All Areas of Technology,2011(11):1211-1221. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%