分别采用磁力搅拌-直流电沉积法、超声波搅拌-直流电沉积法和超声波搅拌-脉冲电流沉积法制备Ni-SiC纳米微粒复合镀层,并探讨电沉积方法对复合镀层组织结构、显微硬度、耐磨性及耐蚀性的影响.结果表明:超声波搅拌能引发扰动搅拌和击碎分散等综合效应,对共沉积过程起到积极促进作用,明显改善复合镀层的形貌组织,提高硬度、耐磨性和耐蚀性;并且进一步替代加载脉冲电流后,脉冲电流和超声波的作用叠加,使电沉积制备的复合镀层表面更平整,结构更致密,硬度更高,耐磨性和耐蚀性也更好.
参考文献
| [1] | Vaezi MR;Sadrnezhaad SK;Nikzad L .Electrodeposition of Ni-SiC nano-composite coatings and evaluation of wear and corrosion resistance and electroplating characteristics[J].Colloids and Surfaces, A. Physicochemical and Engineering Aspects,2008(1/3):176-182. |
| [2] | L. Benea;F. Wenger;P. Ponthiaux;J. P. Celis .Tribocorrosion behaviour of Ni-SiC nano-structured composite coatings obtained by electrodeposition[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2009(3/4):398-405. |
| [3] | Electrodeposition of nickel/SiC composites in the presence of cetyltrimethylammonium bromide[J].Applied Surface Science: A Journal Devoted to the Properties of Interfaces in Relation to the Synthesis and Behaviour of Materials,2010(24):7414-7420. |
| [4] | 胡振峰,徐滨士,董世运.纳米颗粒复合电刷镀液制备方法的研究[J].材料工程,2007(10):72-75,80. |
| [5] | 彭元芳,赵国鹏,刘建平,曾振欧,于杰.Ni-α-Al2O3纳米复合电镀最佳工艺条件的确定[J].表面技术,2004(01):53-55. |
| [6] | 李雪松,WU Hua,杨友,JIANG Zhong-hao.MB8镁合金阴极电沉积Ni-SiC纳米复合镀层微观结构及性能[J].中国有色金属学报,2008(07):1261-1267. |
| [7] | 吴化,陈涛,王庆辉.电沉积Ni-SiC纳米复合镀层的显微组织分析[J].材料工程,2011(12):48-52. |
| [8] | 薛玉君,司东宏,刘红彬,李济顺,兰明明.电沉积方式对Ni-CeO2纳米复合镀层摩擦磨损性能的影响[J].中国有色金属学报,2011(09):2157-2162. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%