欢迎登录材料期刊网

材料期刊网

中国科学院金属研究所 科学出版社
高级检索
  1. 首页
  2. 期刊
  3. 材料工程
  4. Ti6Al4V合金表面耐磨涂层的研究进展

材料工程, 2003, (3): 38-43. doi: 10.3969/j.issn.1001-4381.2003.03.011

Ti6Al4V合金表面耐磨涂层的研究进展

王亚明 1, , 蒋百灵 2, , 雷廷权 3, , 贾德昌 4, , 周玉 5,

1.哈尔滨工业大学材料科学与工程学院,哈尔滨,150001

2.西安理工大学材料科学与工程学院,西安,710048

3.哈尔滨工业大学材料科学与工程学院,哈尔滨,150001

4.哈尔滨工业大学材料科学与工程学院,哈尔滨,150001

5.哈尔滨工业大学材料科学与工程学院,哈尔滨,150001

关键词： Ti6Al4V , 耐磨涂层 , 微弧氧化涂层

Research Development of Wear-resistance Coatings on Ti6Al4V Alloy Surface

评述了Ti6Al4V合金表面耐磨涂层的最新研究进展,特别对新的微弧氧化陶瓷涂层予以关注,并由此提出了深入研究的方向.

参考文献

[1] F Alonso;J J Ugarte;D Sansom et al.Effects of plasma of ion implantation on Ti6Al4V on its frictional behaviour against UHMWPE[J].Surface and Coatings Technology,1996,83:301-306.
[2] S M Johns et al.Wear resistance of plasma immersion ion implanted Ti6Al4V[J].Surface and Coatings Technology,1996,85:7-14.
[3] A Molinari;G Straffelini;B Tesi et al.Dry sliding wear mechanism of the Ti6Al4V alloy[J].Wear,1997,208:105-122.
[4] L L Hench .Bioceramics from concept to clinic[J].Journal of the American Ceramic Society,1991,74(07):1487-1510.
[5] K A Gross;C C Berndt .In vitro testing of plasma sprayed hydroxyapatite coatings[J].Journal of Materials Science:Materials in Medicine,1995,6(06):219-224.
[6] P Leali;A Merolli .Evaluation of different preparations of plasma-spray hydroxyapatite coating on titanium alloy and duplex stainless steel in rabbit[J].Journal of Materials Science:Materials in Medicine,1994,5(05):345-349.
[7] B Chang;W K Chang;B C Wang et al.Plasma spraying of zirconia-reinforced hydroxyapatite composite coatings on titanium:Part I phase microstructure and bonding strength[J].Journal of Materials Science:Materials in Medicine,1997,8(08):193-200.
[8] E Chang;W J Chang;B C Wang et al.Plasma spraying of zirconia-reinforced hydroxyapatite composite coatings on titanium:Part II dissolution behaviour in simulated body fluid and bonding degradation[J].Journal of Materials Science:Materials in Medicine,1997,8(08):201-211.
[9] J Schrooten;J A Helsen .Adhesion of bioactive glass coating to Ti6Al4V oral implant[J].BIOMATERIALS,2000,21:1461.
[10] 沈桂琴,于荣莉,姬凌峰.Ti-6Al-4V合金表面化学镀Ni-P层的显微组织及性能研究[J].稀有金属材料与工程,1998(02):107-111.
[11] M. I. De Barros;D. Rats;L. Vandenbulcke;G. Farges .Influence of internal diffusion barriers on carbon diffusion in pure titanium and Ti-6Al-4V during diamond deposition[J].Diamond and Related Materials,1999(6):1022-1032.
[12] T Grogler;E Zeiler;A Horner et al.Microwave-plasma-CVD of diamond coatings onto titanium and titanium alloys[J].Surface and Coatings Technology,1998,98:1076-1091.
[13] M. I. De Barros;L. Vandenbulcke;J. J. Bléchet .Influence of diamond characteristics on the tribological behaviour of metals against diamond-coated Ti-6Al-4V alloy[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2001(1/2):68-78.
[14] Barros M.I.;Vandenbulcke L. .Plasma-assisted chemical vapor deposition process for depositing smooth diamond coatings on titanium alloys at moderate temperature[J].Diamond and Related Materials,2000(11):1862-1866.
[15] D Rats;L Vandenbulcke;C Boher et al.Tribological study of diamond coatings on titanium alloys[J].Surface and Coatings Technology,1997,94-95:555-560.
[16] S De;M Teofilo;N F Leite et al.Study on CVD-diamond on Ti6Al4V alloy surface using hot figment assisted technique[J].Thin Solid Films,1997,308-309:254-257.
[17] F M Kustas .Diamond-like carbon coatings on Ti6Al4V[J].Tribology Transactions,1993,36(01):113-119.
[18] B W Buchholtz;E M Kustas .Effects of surface pretreatment of Ti6Al4V on the adhesion and wear lifetimes of sputtered MoS2 coatings[J].Tribology Transactions,1996,39(02):330-337.
[19] X. Nie;A. Leyland;A. Matthews .Low temperature deposition of Cr(N)/TiO{sub}2 coatings using a duplex process of unbalanced magnetron sputtering and micro-arc oxidation[J].Surface & Coatings Technology,2000(0):331-337.
[20] M Khaled;B S Yilbas;J Shirokoff .Electrochemical study of laser nitrided and PVD TiN coated Ti6Al4V alloy:the observation of selective dissolution[J].Surface and Coatings Technology,2001,148:46-54.
[21] Fu YQ.;Batchelor AW.;Liu DX.;Zhu XD.;He JW.;Xu KW.;Loh NL. .Improvement in fretting wear and fatigue resistance of Ti-6Al-4V by application of several surface treatments and coatings[J].Surface & Coatings Technology,1998(2/3):193-197.
[22] U. Wiklund;I. M. Hutchings .Investigation of surface treatments for galling protection of titanium alloys[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2001(2):1034-1041.
[23] Dong H.;Bell T.;Shi W. .Potential of improving tribological performance of UHMWPE by engineering the Ti6Al4V counterfaces[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,1999(1):146-153.
[24] F M Kustas;M S Misra;R Wei et al.High temperature nitrogen implantation of Ti-6Al-4V,II:tribological properties[J].Surface and Coatings Technology,1992,51:106.
[25] B Rauschenbach .Mechanical properties of nitrogen ion implanted Ti-6Al-4V alloy[J].Surface and Coatings Technology,1994,66:279-282.
[26] V C Nath et al.[J].Surface and Coatings Technology,1991,49:510.
[27] A Mucha;M Braun .Requisite parameters for optimal wear performance of nitrogen-implanted titanium and Ti6Al4V[J].Surface and Coatings Technology,1992,50:135.
[28] A Chen;J Blanchard;J R Conrad et al.A study of the relationship between wear rate and nitrogen concentration profile and application to plasma source ion implanted Ti6Al4V alloy[J].Wear,1993,165:97.
[29] S Han;H Kim;Y Lee et al.Plasma source ion implantation of nitrogen,carbon and oxygen into Ti6Al4V alloy[J].Surface and Coatings Technology,1996,82:275.
[30] J Rieu;A Pichat;L M Rabbe et al.Structural modifications induced by ion implantation in metals and polymerd used for orthopaedic prostheses[J].Materials Science and Technology,1992,8:589-593.
[31] H A Mckellop;T V Rostlund .Wear behaviour of ion-implanted Ti6Al4V against UHMW polyetbylene[J].Journal of Biomedical Materials Research,1990,24(11):1413-1425.
[32] C B Johansson;J Lausmaa;T Roshund et al.Commercially pure titanium and Ti6Al4V implants with and without nitrogen-ion implantation:surface characterization and quantitative studies in rabbit cortical bone[J].Journal of Materials Science:Materials in Medicine,1993,4(04):132-141.
[33] 季红兵 .Ti6Al4V等离子体基离子注入氮碳层结构与摩擦学行为[D].哈尔滨工业大学,2000.
[34] H. SCHMIDT;A. SCHMINKE;M. SCHMIEDGEN .COMPOUND FORMATION AND ABRASION RESISTANCE OF ION-IMPLANTED Ti6Al4V[J].Acta materialia,2001(3):487-495.
[35] Leng YX.;Zeng ZM.;Tian XB.;Yang P.;Huang N.;Zhou ZR.;Chu PK.;Chen JY. .Properties of titanium oxide biomaterials synthesized by titanium plasma immersion ion implantation and reactive ion oxidation[J].Thin Solid Films: An International Journal on the Science and Technology of Thin and Thick Films,2000(0):573-577.
[36] Loinaz A.;Alonso F.;Onate JI.;Ensinger W.;Rinner M. .Effects of plasma immersion ion implantation of oxygen on mechanical properties and microstructure of Ti6Al4V[J].Surface & Coatings Technology,1998(0):262-267.
[37] A Aladjem.Review:Anodic oxidation of titanium and its alloys[J].Journal of Materials Science,1973(08):688-704.
[38] 何文芳 .钛阳极氧化[J].电镀与环保,1998,18(06):26.
[39] Jerry L.Patel;Nannaji Saka .Microplasmic Coatings[J].American Ceramic Society bulletin,2001(4):27-29.
[40] ПСГОРДИЕНКО;СВГНЕДЕНКОВ;ОАХРИСАНФОВА.ТД.поведениевморскойводепокрытийнатитанесформированныхметодоммикродуговогооксидированиявэлектролитахразличногосоставав[J].физХимОбрабМетер,1995(03):77-83.
[41] J. Schreckenbach;F. Schlottig;G. Marx .Preparation and microstructure characterization of anodic spark deposited barium titanate conversion layers[J].Journal of Materials Research,1999(4):1437-1443.
[42] A. L. Yerokhin;X. Nie;A. Leyland;A. Matthews .Characterisation of oxide films produced by plasma electrolytic oxidation of a Ti-6Al-4V alloy[J].Surface & Coatings Technology,2000(2/3):195-206.
[43] W. Xue;Z. Deng;H. Ma .MICROSTRUCTURE AND PHASE COMPOSITION OF MICROARC OXIDATION COATINGS FORMED ON Ti-6Al-4V ALLOY IN ALUMINATE SOLUTION[J].Surface Engineering,2001(4):323-326.
[44] Wenbin Xue;Chao Wang;Ruyi Chen .Structure and properties characterization of ceramic coatings produced on Ti-6Al-4V alloy by microarc oxidation in aluminate solution[J].Materials Letters,2002(6):435-441.
[45] Wenbin XUE,CHAO WANG,Zhiwei DENG,Ruyi CHEN,Tonghe ZHANG.Influence of Electrolytes on the Microstructure of Microarc Oxidation Coatings on Ti-6Al-4V Alloy[J].材料科学技术学报(英文版),2002(01):37-39.
[46] 薛文斌,邓志威,李永良,陈如意,张通和.Ti-6Al-4V在NaAlO2溶液中微弧氧化陶瓷膜的组织结构研究[J].材料科学与工艺,2000(03):41-45.
[47] 薛文斌,邓志威,陈如意,张通和.钛合金在硅酸盐溶液中微弧氧化陶瓷膜的组织结构[J].金属热处理,2000(02):5-7.
[48] G. F. Yin;J. M. Luo;C. Q. Zheng;H. H. Tong;Y. F. Huo;L. L. Mu .Preparation of DLC gradient biomaterials by means of plasma source ion implant-ion beam enhanced deposition[J].Thin Solid Films: An International Journal on the Science and Technology of Thin and Thick Films,1999(1):67-70.
[49] Kwang-Leong Choy;Emmanuelle Felix .Functionally graded diamond-like carbon coatings on metallic substrates[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2000(1/2):162-169.
[50] 蒋书文,尹光福,郑昌琼,张利,孟永刚,杨文言.钛合金表面类金刚石碳梯度薄膜的摩擦磨损性能研究[J].摩擦学学报,2001(03):167-171.
[51] 杨敏,郑昌琼,冉均国,张皖欣,李祝.UHMWPE与钛基-TiN-TiC系梯度薄膜材料对磨的生物摩擦磨损特性[J].生物医学工程学杂志,2000(01):1-4.
[52] 杨敏,郑昌琼,冉均国,钟毓茂,张欣苑.钛基-TiN-TiC系梯度薄膜材料的生物摩擦磨损特性研究[J].功能材料,2000(02):209-211.
[53] 王红卫;孙敏;冉均国 等.Ti6Al4V-DLC系梯度材料的设计[J].苏州大学学报(自然科学版),1999,15(03):78-82.
[54] X. Nie;A. Leyland;A. Matthews .Deposition of layered bioceramic hydroxyapatite/TiO{sub}2 coatings on titanium alloys using a hybrid technique of micro-arc oxidation and electrophoresis[J].Surface & Coatings Technology,2000(1/3):407-414.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
作者相关
文章评分
  • 您的评分：
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%

版权所有©2010中国科学院金属研究所中国科技出版传媒股份有限公司

本系统由北京仁和汇智信息技术有限公司设计开发

技术支持：info@rhhz.net