对金属基复合材料双剪切试样的应力应变分布进行蠕变有限元计算分析,得到受剪区的应力应变随时间的分布规律.通过典型取向试样分析,表明受剪区的应力应变与纤维随机分布平面和加载方向夹角θ之间存在很大的相关性:随角度θ的减小,其蠕变应力分布越均匀;当角度θ=45°时,其稳态蠕变率γ最大.双剪切试样能得到较均匀的剪应力区域,适合研究材料纯剪应力状态下的蠕变行为.
参考文献
| [1] | C Mayr;G Eggeler;G A Webster .Double shear creep testing of super-alloy single crystals at temperatures above 1000℃[J].Materials Science and Engineering,1995,A199:121-130. |
| [2] | A Yawny;G Kaustrater.Micro structural assessment of fiber damage after tensile and shear creep deformation of a short fiber reinforced aluminum alloy with a fiber volume fraction of 8%[A].Proceedings of the 9th International Conference held in Swansea,2001:219-228. |
| [3] | D J Gooch;I M How.Techniques for multi-axial creep Testing[M].Elsevier London,1986 |
| [4] | R J Browne;D Lonsdale;P E J Flewitt .Multi-axial stress rupture testing and compendium of data for creep resisting steel[J].Journal of Eng Nater Technology ASME Trans,1982,104:291-296. |
| [5] | A Bertram;J Schewskiand;M Zelevski .Problematic von Tor sionsversuchen bei anisotropies Material[J].ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND MECHANIK,1991,71:387-390. |
| [6] | P R Parselay;C H Wells;G R Leverant;L H Burck .Creep of single crystal nickel-base super-alloy tubes under biaxial tension[J].Journal of Applied Mechanics,Transactions ASME,1992,104:559-567. |
| [7] | Z F Yue .Investigation of the double shear creep specimens to study the creep behavior of short fiber metal matrix composites[J].Materials at High Temperatures,2000,18(03):171-175. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%