针对1K缎纹碳纤维织物/环氧复合材料层板销钉连接,实验研究了几何参数对连接性能的影响.选取了不同的端距和边距,测试了碳纤维织物复合材料层板W/D(试样宽度/孔直径)及E/D(孔端距/孔直径)对销钉连接强度的影响,并分析了销钉连接的破坏模式.实验结果表明:1K缎纹织物/环氧复合材料层板销钉连接承载能力随着边距E和端距W的增加而增加,当E/D=2,W/D=3时,销钉连接强度达到稳定值,此后增加边距E和端距W值连接强度不会有明显的增加.
参考文献
[1] | COLLINGS T A .The strength of bolted joints in multi-directional CFRP laminates[J].Composites,1977,8:43-55. |
[2] | Buket Okutan .The effects of geometric parameters on the failure strength for pin-loaded multi-directional fiber-glass reinforced epoxy laminate[J].Composites, Part A. Applied science and manufacturing,2002(8):567-578. |
[3] | OUINN W J;MATTHEWS F L .The effect of stacking sequence on the pin-bearing strength in glass fiber reinforced plastic[J].Journal of Composite Materials,1977,11:139-145. |
[4] | Aktas A;DIRIKOLU M H .The effect of stacking sequence of carbon epoxy composite laminates on pinned-joint strength[J].Computers and Structures,2003,62:107-111. |
[5] | 华玉,郦正能,寇长河.复合材料单钉接头的损伤累积模拟[J].航空学报,1995(02):153. |
[6] | 关长文,陈浩然,成万植.复合材料和结构机械连接件破坏历程的数值模拟与试验验证[J].航空学报,1995(02):143. |
[7] | 薛克兴;周瑾.复合材料结构连接件设计与强度[M].北京:航空工业出版社,1988 |
[8] | 汪裕炳.复合材料的结构连接[M].北京:国防工业出版社,1992 |
[9] | Matthews F L;ROSHAN A A;PHILIPS L N .The bolt bearing strength of glass/carbon hybrid composites[J].Composites,1982,13:225-227. |
[10] | Buket Okutan;Zuleyha Aslan;Ramazan Karakuzu .A study of the effects of various geometric parameters on the failure strength of pin-loaded woven-glass-fiber reinforced epoxy laminate[J].Composites science and technology,2001(10):1491-1497. |
[11] | Icten BM.;Okutan B.;Karakuzu R. .Failure strength of woven glass fiber-epoxy composites pinned joints[J].Journal of Composite Materials,2003(15):1337-1350. |
[12] | Buket Okutan;Ramazan Karakuzu .The strength of pinned joints in laminated composites[J].Composites science and technology,2003(6):893-905. |
[13] | OKUTAN B;KARAKUZU R .Progressive analysis of pin-load carbon-epoxy woven composite plates[J].Composites Science and Technology,2002,62:1259-1271. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%