基于ANSYS有限元分析软件,采用三维移动热源,对TC4钛合金激光焊接残余应力和变形进行了数值模拟和实验研究.结果表明:钛合金激光焊接产生很大的纵向残余应力,而横向残余应力较小.激光焊接线能量增加时,纵向残余应力拉伸区域变宽,峰值应力降低;而横向残余应力随线能量的增加而升高.在临界焊透规范以上焊接时,随焊接线能量的增大,角变形随之而减小,而横向收缩变形增大.焊件被完全穿透时,线能量对角变形的影响作用降低.钛合金激光焊接变形和残余应力实验结果与数值计算结果吻合性较好.通过焊缝金相实验分析了焊接残余应力和变形与线能量的内在关系.
参考文献
[1] | 北侧彰一;前原健治;武田慎之助.304ステンしス钢のし-ザ溶接变形に关する研究[A].,2002:295-300. |
[2] | 何小东,张建勋,巩水利,李继红.钛合金薄板激光和钨极氩弧焊残余应力测试研究[J].材料工程,2003(12):7-10. |
[3] | 刘敏,陈士煊,康继东,陈勇.钛合金平板电子束焊接残余应力数值分析[J].航空动力学报,2001(01):63-66. |
[4] | C. Carmignani;R. Mares;G. Toselli .Transient finite element analysis of deep penetration laser welding process in a singlepass butt-welded thick steel plate[J].Computer Methods in Applied Mechanics and Engineering,1999(3/4):197-214. |
[5] | TSIRKAS S A;PAPANIKOS P;KERMANIDIS TH.Numerical simulation of the laser welded process in butt-joint specimens[J].Journal of Materials Processing Technology,2003(134):59-69. |
[6] | CHANG W S;NAS J .A study on the prediction of the laser welded shape with varying heat source equations and the thermal distortion of a small structure in micro-joining[J].Journal of Materials Processing Technology,2002,120:208-214. |
[7] | KOICHI MASUBUCHI.Analysis of welded structures[M].England:Pergam on Press Ltd,1980:219-222. |
[8] | D 达拉伊.焊接热效应[M].北京:机械工业出版社,1997:136-253. |
[9] | 中国机械工程学会.焊接手册第3卷[M].北京:机械工业出版社,1992:51-68. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%