采用等温压缩实验,对Al2O3/Al复合材料在伪半固态下流变行为进行了研究.结果表明,Al2O3/Al复合材料在伪半固态下压缩时的流动应力随实验温度的提高而显著下降;并分析了复合材料伪半固态温度下的流变行为以及其影响因素.
参考文献
[1] | 谢水生;黄声宏.半固态金属加工技术及其应用[M].北京:冶金工业出版社,1999:89-112. |
[2] | 罗守靖,田文彤,谢水生,毛卫民.半固态加工技术及应用[J].中国有色金属学报,2000(06):765. |
[3] | 程钢,樊刚.半固态材料成形技术的研究和应用[J].兵器材料科学与工程,2001(05):66-68. |
[4] | Muller SG.;Hobgood HM.;Tsvetkov VF.;Brady M.;Henshall D. Jenny JR.;Malta D.;Carter CH.;Glass RC. .The status of SiC bulk growth from an industrial point of view[J].Journal of Crystal Growth,2000(1/4):325-332. |
[5] | IWASAKI H;MORI T;MAABUCHI M et al.Shear deformation behavior of Al-5%Mg in semi-solid state[J].Acta Materialia,1998,46(18):351-360. |
[6] | GEBELIN J C;FAVIER D;SUERY M .Comparison of one and two-phase approaches for numerical simulation of semi-solid processing[A].USA Colorado,1998,121(109):309-316. |
[7] | 弗莱明斯.凝固过程[M].北京:冶金工业出版社,1981:1-12. |
[8] | MARTIN C L;BROWN S B;FAVIER D et al.Shear deformation of high solid fraction (>60) semi-solid Sn-Pb under various structures[J].Materials Science and Engineering,1995,A202(121):112-122. |
[9] | Tzimas E.;Zavaliangos A. .Mechanical behavior of alloys with equiaxed microstructure in the semisolid state at high solid content[J].Acta materialia,1999(2):517-528. |
[10] | KANG C G;YOON J H;SEO Y H .The upsetting behavior of semi-solid aluminum material fabricated by a mechanical stirring process[J].Journal of Materials Processing Technology,1997,66(12):30-38. |
[11] | NGUYEN T L;SUERY M .Compressive behaviour of partially remelted A356 alloys reinforced with SiC particles[J].Materials Science and Technology,1994,10(09):894-901. |
[12] | NGUYEN T L;SUERY M.Compressive behaviour of partially remelted SiC reinforced Al-Cu alloys[A].USA:MIT,1992:12-20. |
[13] | 罗守靖;祖力君 .应变速率、液体体积分数和液体粘度对金属半固态成形力的影响[J].中国有色金属学报,2000,10(08):192-197. |
[14] | 罗守靖,程远胜,杜之明.陶瓷基复合材料伪半固态触变成形及其在卫星角框件中的应用[J].材料工程,2005(01):45-49. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%