介绍了开孔多孔陶瓷的制备方法及其研究进展,着重描述了有机泡沫浸渍工艺、添加造孔剂工艺、溶胶-凝胶工艺、挤出成型工艺、木质陶瓷和包混工艺,并总结了各工艺制备多孔陶瓷的优、缺点.
参考文献
[1] | Fino D;Russo N;Saracco G;Specchia V .A multifunctional filter for the simultaneous removal of fly-ash and NOx from incinerator flue gases[J].Chemical Engineering Science,2004(22/23):5329-5336. |
[2] | Aji A. Anappara;S. Rajeshkumar;P. Mukundan .Impedance spectroscopic studies of sol-gel derived subcritically dried silica aerogels[J].Acta materialia,2004(2):369-375. |
[3] | MIDDLETON H;WILL J;KOHLER A et al.Ceramic TiO2-foams:characterization of a potential scaffold[J].Journal of the European Ceramic Society,2004,24(04):661-668. |
[4] | SCHWARTZWALDER K;SOMERS H;SOMERS A V .Method of making porous ceramic articles[P].USP:3090094,1963-05-21. |
[5] | 朱新文,江东亮.有机泡沫浸渍工艺--一种经济实用的多孔陶瓷制备工艺[J].硅酸盐通报,2000(03):45-51. |
[6] | 朱新文,江东亮,谭寿洪.碳化硅网眼多孔陶瓷的制备[J].无机材料学报,2000(06):1055-1060. |
[7] | Zhu XW.;Jiang DL.;Tan SH. .Preparation of silicon carbide reticulated porous ceramics[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2002(1/2):232-238. |
[8] | MIDDLETON H;NAIMI M;AGHAIE A .Dual behavior of CaCO3 as a porosifier and sintering aid in the manufacture of alumina membrane/catalyst supports[J].Journal of the European Ceramic Society,2004,24(10-11):3195-3201. |
[9] | 迟伟光,江东亮,黄政仁,谭寿洪.碳化硅多孔陶瓷的制备及烧结研究[J].化学学报,2003(12):2002-2007. |
[10] | MIDDLETON H;HAMPHSHIRE S .Characterization of porous silicon nitride materials produced with starch[J].Journal of the European Ceramic Society,2004,24(02):413-419. |
[11] | 姚秀敏,谭寿洪,江东亮.孔径可控的多孔羟基磷灰石的制备工艺研究[J].功能材料与器件学报,2001(02):152-156. |
[12] | 资文华,孙俊赛,黄明华,陈庆华,缪松兰.溶胶-凝胶法制备多孔陶瓷的研究进展[J].中国陶瓷,2003(04):14-18. |
[13] | VERDENELLI M;PAAROLA S;CHASSAGNEUX F et al.Sol-gel preparation and thermo-mechanical properties of porousxAl2O3-ySiO2 coatings on SiC Hi-Nicalon fibres[J].Journal of the European Ceramic Society,2003,23:1207-1213. |
[14] | Lijun Zu;Shoujing Luo .Study on the powder mixing and semi-solid extrusion forming process of SiCp/2024Al composites[J].Journal of Materials Processing Technology,2001(3):189-193. |
[15] | Taek-Soo Kim;Takashi Goto;Byong-Taek Lee .Microstructure Control and Mechanical Properties of Fibrous Al_2O_3/ZrO_2 Composites Fabricated by Extrusion Process[J].Scripta materialia,2005(8):725-729. |
[16] | Xian-qing Xie;Di Zhang;Tong-xiang Fan .The fabrication of composites with interpenetrating networks based on woodceramics[J].Materials Letters,2002(1/2):102-107. |
[17] | Qiao Guanjun;Ma Rong;Cai Ning .Microstructure transmissibility in preparing SiC ceramics from natural wood[J].Journal of Materials Processing Technology,2002(1/3):107-110. |
[18] | MIDDLETON H;WANG J P;QIAO G J et al.Preparation of porous SiC ceramic with a woodlike microstructure by sol-gel and carbothermal reduction processing[J].Journal of the European Ceramic Society,2004,24(10-11):3251-3259. |
[19] | Luhleich H.;Nickel H.;Dias J. .THE COAT-MIX PROCEDURE USING CARBON FILLERS[J].Carbon: An International Journal Sponsored by the American Carbon Society,1997(1):95-102. |
[20] | SIMWONIS D;THULEN H;DIAS F J et al.Properties of Ni/YSZ porous cermets for SOFC by tape casting and coat-mix process[J].Journal of Materials Processing Technology,1999,92(93):107-111. |
[21] | MIDDLETON H;DIETHELM S;IHEINGER R et al.Cocasting and co-sintering of porous MgO support plates with thin dense perovskite layers of LaSrFeCoO3[J].Journal of the European Ceramic Society,2004,24(06):1083-1086. |
[22] | Fukasawa T.;Ando M.;Ohji T.;Goto Y.;Deng ZY. .Pore structure of porous ceramics synthesized from water-based slurry by freeze-dry process[J].Journal of Materials Science,2001(10):2523-2527. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%