以聚氨酯泡沫树脂为基体,采用浆料涂覆、电沉积、热解和合金化等技术制备出网状结构的高孔率泡沫Ni-32Cr合金.对该泡沫合金的形貌结构、成分分布和使用性能进行了分析研究.实验结果表明:该泡沫合金骨架平整,成分均匀,相对密度为6.4%,骨架的室温显微硬度HV为168,压缩强度约5MPa,且800℃时氧化1h,其增重率小于2×10-3.
参考文献
| [1] | PESTRYAKOV A N;YURCHENKO E N;FEOFILOV A E .Foammetal catalysts for purification of waste gases and neutralization of automotive emissions[J].Catalysis Today,1996,29:67-70. |
| [2] | TAKAO M;MASAYUKI I;HIROSHI Y .Filter member for purifying gas and method for manufacturing the same[P].US 5830415,1998-11-03. |
| [3] | ISMAGILOV Z R;PUSHKAREV V V;PODYACHEVA O Y et al.A catalytic heat-exchanging tubular reactor for combining of high temperature exothermic and endothermic reactions[J].Chemical Engineering Journal,2001,82:355-360. |
| [4] | Heeman Choe;David C. Dunand .Mechanical properties of oxidation-resistant Ni-Cr foams[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2004(1/2):184-193. |
| [5] | Heeman Choe;David C. Dunand .Synthesis, structure, and mechanical properties of Ni–Al and Ni–Cr–Al superalloy foams[J].Acta materialia,2004(5):1283-1295. |
| [6] | TOSHOYASU T;SATORU O;TOMOHIKO I .Process for the production of beat-and corrosion-resistant porous metal body[P].US 5762387,1997-09-30. |
| [7] | TOSHOYASU T;SATORU O;TOMOHIKO I .Corrosion-resistant metallic porous member and method of manufacturing the same[P].US 5582867,1996-12-10. |
| [8] | John Banhart .Manufacture, characterization and application of cellular Metals and metal foams[J].Progress in materials science,2001(6):559-632. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%