采用普通熔铸的方法研究了加Cr对Al-5%Fe合金铸态组织的影响,采用XRD方法分析了合金中的物相.结果表明,Cr可以明显改善合金中的初生Al3Fe相形貌.不加Cr时,合金中的初生Al3Fe相大多为针状、针片状,仅有少量为花朵状;加入0.2%～1.0%Cr,Al3Fe相转变为细小针状和针点状;Cr含量超过1.0%时,组织开始粗化,出现长针状和星状Al3Fe相.SEM扫描表明,Cr主要固溶在Al3Fe相中.XRD并未检测到含Cr化合物.
参考文献
| [1] | O.Akinlade;R.N.Singh .Thermodynamics of liquid Al-Fe alloys[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2000(1/2):163-168. |
| [2] | E. Illekova;D. Janickovic;P. Kubecka .Thermodynamic analysis of the clustering in the Al_(90)Fe_7Nb_3 alloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2004(0):946-950. |
| [3] | K. L. Sahoo;C. S. Sivaramakrishnan .Some studies on Al-8.3Fe-0.8V-0.9Si alloy for near net shape casting[J].Journal of Materials Processing Technology,2003(2/3):253-257. |
| [4] | Yoneyama N.;Mizoguchi K.;Kumai S.;Sato A.;Kiritani M. .Plastic deformation of Al13Fe4 particles in Al-Al13Fe4 by high-speed compression[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2003(1/2):117-124. |
| [5] | F. Audebert;C. Mendive;A. Vidal .Structure and mechanical behaviour of Al-Fe-X and Al-Ni-X rapidly solidified alloys[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2004(0):1196-1200. |
| [6] | ZAMBON A;BADAN B;MADDALENA A .Production,microstructural and mechanical characterization of spray formed Al-6wt.%Fe alloy and pre-mixed Al-6% Fe/SiCp composite[J].Materials Science and Engineering,2004,A375-A377:645-650. |
| [7] | S. Yaneva;A. Kalkanli;K. Petrov;R. Petrov;Ir. Yvan Houbaert;S. Kassabov .Structure development in rapidly solidified Al-Fe-V-Si ribbons[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2004(1/2):90-98. |
| [8] | P. Y. Li;H. J. Yu;S. C. Chai;Y. R. Li .Microstructure and properties of rapidly solidified powder metallurgy Al-Fe-Mo-Si alloys[J].Scripta materialia,2003(9):819-824. |
| [9] | GROSDIDIER T;KERAMIDAS P;SHAO G et al.Influence of 2.8% zirconium addition on the microstructure of rapidly solidified Al-8Fe-4Ni alloy[J].Materials Science and Engineering,1999,A267:60-70. |
| [10] | ADAM MCL C;HOGAN L M .the Aluminum-iron Eutectic System[J].Journal of Austral Inst Met,1972,17:81-90. |
| [11] | SAHOO K L;DASS K;MURTY B S .Formation of novel microstructures in conventionally cast Al-Fe-V-Si alloys[J].Materials Science and Engineering,2003,A355:193-200. |
| [12] | 周振平,李荣德.Mn和Mg对Al-5Fe合金初生Al3Fe相形貌的影响[J].金属学报,2003(06):608-612. |
| [13] | 李荣德,周振平,白彦华,于海朋.Mg对铸造Al-10%Fe合金初生富铁相形貌的影响[J].机械工程学报,2003(05):32-35. |
| [14] | 蒙尔多福;王祝堂;张振录;郑璇.铝合金的组织和性能[M].北京:冶金工业出版社,1988 |
| [15] | 王家炘;黄积荣;林建生.金属的凝固及其控制[M].北京:机械工业出版社,1983 |
| [16] | ADAM C MCL;HOGAN L M .Crystallography of the Al-Al3 Fe eutectic[J].Acta Materialia,1975,23:345-354. |
| [17] | 虞觉奇;易文质;陈邦迪.二元合金状态图集[M].上海:上海科学技术出版社,1987 |
| [18] | LOUIS E;MORA R;PASTOR J.Nature of star-shaped clusters of FeAl3 in aluminum-iron alloys[J].Metal Science Journal,1980(12):591-593. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%