采用G1eeble热模拟机,利用电场诱导Fe-Ti-C系燃烧合成,针对保温过程和压力对体系燃烧合成的影响进行了探讨.对体系燃烧合成过程的温度场和合成产物进行了分析,结果表明:电场作用可降低体系的点火温度,200℃保温压坯的点火温度及所达到的最高温度都比相对应的未保温压坯的高,未保温压坯的合成产物由TiC,Fe和Fe2Ti组成,而保温压坯的合成产物主要由TiC和Fe组成,经过200℃保温的合成产物中TiC颗粒比未保温的要小一些.在加热过程中对压坯施加一较小的压力不仅可以降低点火温度,还能获得细小的TiC颗粒,但压力对合成产物的组成影响不大,都由Fe,TiC和少量Fe2Ti组成.
参考文献
| [1] | XUE H;MUNIR Z A .Synthesis of A1N-SiC composites and solid solutions field-activated self-propagating combustion[J].Journal of the European Ceramic Society,1997,17:1787-1792. |
| [2] | Z. A. Munir .The effect of external electric fields on the nature and properties of materials synthesized by self-propagating combustion[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2000(2):125-137. |
| [3] | Munir ZA. .FIELD EFFECTS IN SELF-PROPAGATING SOLID-STATE SYNTHESIS REACTIONS[J].Solid state ionics,1997(2):991-1001. |
| [4] | GRAVE O A;MUNIR Z A .The effect of an electric field on the microstmctural development during combustion synthesis of TiN-TiC composites[J].Journal of Alloys and Compounds,2002,340:79-87. |
| [5] | Feng Keqin,杨屹,沈保罗,林慧敏,何洪.电场作用下压坯密度对Fe-Ti-C体系低温燃烧合成的影响[J].稀有金属材料与工程,2005(03):479-482. |
| [6] | 冯可芹,杨屹,沈保罗,杨春楣,郭路宝,何洪.电场作用下Fe含量对Fe-Ti-C体系低温燃烧合成的影响[J].稀有金属材料与工程,2004(02):161-165. |
| [7] | 史斌星.量子物理学[M].北京:清华大学出版社,1992:80-82. |
| [8] | 张卫方,韩杰才,杜善义,陶春虎,习年生.SHS/PHIP制备TiC-Fe金属陶瓷的微观组织研究[J].复合材料学报,2001(02):65-69. |
| [9] | 杨屹,冯可芹,申开智,杨春眉,郭路宝,何洪.基于大热流密度的Fe/TiC复合材料低温反应合成过程研究[J].热加工工艺,2003(05):3-5. |
| [10] | 杨屹;冯可芹;申开智 .基于电场作用下的Fe-Ti-C体系低温燃烧合成:压坯升温特性及收缩动力学研究[J].稀有金属材料与工程,2004,33(z1):110-114. |
| [11] | DUNMEAD S D;READY D W .Kinetics of combustion synthesis in the Ti-C and Ti-C-Ni systems[J].Journal of the American Ceramic Society,1989,72(12):2318-2324. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%