Continuous carbon fiber reinforced copper matrix composites with 70％(volume fraction)of carbon fibers prepared by squeeze casting technique have been used for investigation of the coefficient of thermal expansion(CTE)and thermal conductivity．Thermo-physical properties have been measured in both, longitudinal and transversal directions to the fiber orientation．The results showed that Cf／Cu composites may be a suitable candidate for heat sinks because of its good thermo-physical properties e．g．the low CTE(4.18×10-6／K)in longitudinal orientation and(14．98×10-6／K)in transversal orientation at the range of 20-50℃，a good thermal conductivity(87．2 W／m·K)in longitudinal orientation and(58．2 W／m·K)in transversal orientation．Measured CTE and thermal conductivity values are compared with those predicted by several well-known models．Eshelby model gave better results for prediction of the CTE and thermal conductivity of the unidirectional composites．
参考文献
| [1] | Y L Shenm;A Needleman;S Suresh .Coefficients of Thermal Expansion of Metal-Matrix Composites for Electronic Packaging[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1994,25A:839-849. |
| [2] | Toray Industries Inc .Carbon fibres Department Company leaflet,Table 2-1 Torayca Typical Fiber Properties,ST2B/1994[Z]. |
| [3] | J Korab;G Korb;P Sebo.Thermal expansion and thermal conductivity of continuous carbon fibre reinforced copper matrix composites[A].:104-108. |
| [4] | G. Korb;J. Korab;G. Groboth .Thermal expansion behaviour of unidirectional carbon-fibre-reinforced copper-matrix composites[J].Composites, Part A. Applied science and manufacturing,1998(12):1563-1567. |
| [5] | P. Rupnowski;M. Gentz;J.K. Sutter .An evaluation of the elastic properties and thermal expansion coefficients of medium and high modulus graphite fibers[J].Composites, Part A. Applied science and manufacturing,2005(3):327-338. |
| [6] | J. Korab;P. Stefanik;S. Kavecky .Thermal conductivity of unidirectional copper matrix carbon fibre composites[J].Composites, Part A. Applied science and manufacturing,2002(4):577-581. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%